Skip to the content
2 layersTechin514 final sensor pcb, the printed circuit board in 3D

Techin514 final sensor pcb

cnzhe/TECHIN_514_Project
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
17
Pads
17
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 7 (file 20221018)
Created
14 Jan 2024
Updated
3 Mar 2024

Overview

Techin514 final sensor pcb is an open-source printed circuit board by cnzhe, from the cnzhe/TECHIN_514_Project repository on GitHub. It is a 2-layer board with 2 parts on 17 nets.

It is built around the DS18B20. It belongs with the sensors and measurement boards of this library.

Main components

1

README

README.md

Smart Temperature Detector for Electronic Devices

The Electronic Device Temperature Detector is designed to measure the temperature change of all electronic devices - whether they are in proper operating condition or not.

Project Overview and General Sketch

Updated:

Sensor Device

Updated:

Display Device

Updated:

System Communication Architecture and Detailed Function Diagram

Updated:

Parts

2
QtyValueFootprintReferences
1DS18B20Package_TO_SOT_THT:TO-92_InlineU2
1~esp32:XIAO_ESP32_SENSEU1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers80 × 54.9 mmESP32WifiAisTempVolt2, the printed circuit board in 3D

    ESP32WifiAisTempVolt2

    AK-Homberger/NMEA2000WifiGateway-with-ESP32

    This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.

    18 parts94GPL-3.0
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 2 layers69 × 57 mmBuoy4, the printed circuit board in 3D

    Buoy4

    wjpavalko/Maker-Buoy

    Repository of Open Source Maker Buoy Files

    46 parts39
  • 2 layers26 × 34.8 mmWemosD1Mini, the printed circuit board in 3D

    WemosD1Mini

    RuiSantosdotme/ESP8266-Multisensor-Shield

    Complete step-by-step instructions »

    10 parts29
  • 2 layers162 × 60 mmEsp shield, the printed circuit board in 3D

    Esp shield

    felixwittwer/homeassistant_automaic_greenhouse

    A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

    20 parts27
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT

Questions

What parts does the Techin514 final sensor pcb use?

2 parts, built around the DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Techin514 final sensor pcb KiCad files?

From the cnzhe/TECHIN_514_Project repository on GitHub, at the commit this page was made from: the board is techin514_final_sensor_pcb/techin514_final_sensor_pcb.kicad_pcb and its schematic techin514_final_sensor_pcb/techin514_final_sensor_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Techin514 final sensor pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask cnzhe before reusing the design.