2 layers82.6 × 61 mm
EEPROM Programmer
CNCNoob/Universal-EEPROM-programmer
Great Arduino based ROM Programmer design.
5 parts1MIT
2 layers95.3 × 74.9 mm256%20programmer/27(C)256%20programmer.kicad_pcb.jpg)
27(C)256 programmer
CNCNoob/Universal-EEPROM-programmer1Great Arduino based ROM Programmer design.
- Size
- 95.3 × 74.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 2
- Nets
- 34
- Pads
- 62
- Tracks, vias
- 363, 44
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2019
- Updated
- 29 Jun 2019
Overview
27(C)256 programmer is an open-source printed circuit board by CNCNoob, from the CNCNoob/Universal-EEPROM-programmer repository on GitHub, published under the MIT licence. It is a 2-layer board of 95.3 × 74.9 mm with 2 parts on 34 nets, routed with 363 tracks and 44 vias.
Its parts include 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
README
README.mdUniversal-EEPROM-Programmer
Marvellouse EEPROM programming device that will support many EEPROMs and some EPROMs
main Arduino shield with 28pin molex connector which connects to user specific boards.
Created and programmed using: KiCad, Aduino and processing
Parts
2| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm_LongPads | U1 |
| 1 | Conn_02x17_Odd_Even | Connector_IDC:IDC-Header_2x17_P2.54mm_Horizontal | J1 |
More from CNCNoob/Universal-EEPROM-programmer
1Similar boards
- 2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0 - 2 layers33 × 19 mm
- 2 layers
Diode template
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
2 parts547GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 button
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
2 parts546MIT - 2 layers35.1 × 46.8 mm
SDEX2M2 Breakout Board
NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
2 parts542GPL-3.0 - 2 layers59.3 × 36.6 mm
ExpansionBoardTemplate
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
2 parts459GPL-3.0 - 2 layers
Alpha.9mm.wire
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
2 parts410 - 2 layers26.7 × 64 mm
Questions
How big is the 27(C)256 programmer PCB?
It measures 95.3 × 74.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 27(C)256 programmer use?
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 27(C)256 programmer KiCad files?
From the CNCNoob/Universal-EEPROM-programmer repository on GitHub, at the commit this page was made from: the board is Main Arduino version/28(C)256 programmer/27(C)256 programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 27(C)256 programmer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).