2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers90 × 35 mm
Adapter01
CNCKitchen/CetusMK3_RRF14Cetus MK3 conversion to a RepRapFirmware mainboard
- Size
- 90 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 16
- Pads
- 39
- Tracks, vias
- 77, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2021
- Updated
- 19 Feb 2022
Overview
Adapter01 is an open-source printed circuit board by CNCKitchen, from the CNCKitchen/CetusMK3_RRF repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 90 × 35 mm with 14 parts on 16 nets, routed with 77 tracks and 0 vias.
README
README.mdCetusMK3_RRF
Cetus MK3 conversion to a RepRapFirmware mainboard.
Introduction
This repository contains all the files and resources I used to convert my CETUS MK3 to a RepRapFirmware mainboard, more precisely the Mellow FLY RRF E3.
Contents
Adapter Board
Contains the KiCAD and GERBER files to manufacture your own board.
Holder
Contains different holders to mount the adapter board and the new mainboard. Available versions:
- Mellow Fly RRF E3 (and E3 Pro)
PrusaSlicer Profile
Contains the PS profile with wich I did most of my prints. Created with PS2.4 Beta but should also be back-compatible.
RRF Configuration
Contains the configuration files for Reprap Firmware.
- Created for RepRap Firmware 3.4
- Created for Mellow Fly RRF E3
- Thermistor of the hotend was swapped to a standard E3D cartrige style thermistor
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x02_Female | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3, J4, J6 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5, J9 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J8 |
| 1 | Conn_01x04_Female | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J7 |
| 1 | LOGO | adapter01:logo | G*** |
Questions
How big is the Adapter01 PCB?
It measures 90 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adapter01 use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter01 KiCad files?
From the CNCKitchen/CetusMK3_RRF repository on GitHub, at the commit this page was made from: the board is AdapterBoard/adapter01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
