

Galileo Command PCB
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 27
- Nets
- 52
- Pads
- 147
- Tracks, vias
- 103, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Mar 2022
- Updated
- 20 Sep 2025
Overview
Galileo Command PCB is an open-source printed circuit board by cmsc-stageworks, from the cmsc-stageworks/Subsystem-Panels-Documentation-and-Source-Code repository on GitHub. It is a 2-layer board with 27 parts on 52 nets, routed with 103 tracks and 9 vias.
It is built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. Its parts include 16 capacitors, 5 resistors, 3 ICs, 2 connectors and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
3RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdSubsystemPanelsDocumentationAndSourceCode
Source Code and documentation for all the Subsystem Panels, some of the videos and the libraries folder for arduino wouldnt upload, so I suggest checking with Mr. Porter for those
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14, C15, C16 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | RP2040_minimal_r2:RP2040-QFN-56 | U3 |
| 1 | USB_B_Micro | RP2040_minimal_r2:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal_modified | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
More from cmsc-stageworks/Subsystem-Panels-Documentation-and-Source-Code
8- 4 layers133 × 124.4 mm

- 4 layers134.4 × 128.8 mm

- 2 layers85.8 × 53.3 mm

- 2 layers139.7 × 100 mm

- 4 layers135 × 130 mm

- 2 layers80 × 50.5 mm

- 2 layers30.5 × 45.7 mm

- 2 layers45.7 × 45.7 mm

Similar boards
- 4 layers277.2 × 107.5 mm

Katia
ikajdan/katia
A split keyboard with 6 by 3 column staggered keys and 3 thumb keys, based on the Crkbrd design
230 parts33CERN-OHL-P-2.0 - 4 layers51.8 × 20 mm

Sample target
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
57 parts29CC0-1.0 - 4 layers61.8 × 79.6 mm

- 4 layers40 × 58.5 mm

- 2 layers174 × 111 mm

Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers110 × 52 mm

- 2 layers62 × 47 mm

- 2 layers100 × 86 mm

Deflection amp 3
Thinkpad4by3/chibitron
Electrostatic CRT driver designed from the ground up for performance, versatility and ease-of-manufacturability
202 parts6
Questions
What parts does the Galileo Command PCB use?
27 parts, built around the RP2040, W25Q128JVSIQ and ABM8-272-T3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Galileo Command PCB KiCad files?
From the cmsc-stageworks/Subsystem-Panels-Documentation-and-Source-Code repository on GitHub, at the commit this page was made from: the board is Galileo Isolinear Rods Command Panel/PCB/Galileo Command PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Galileo Command PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask cmsc-stageworks before reusing the design.