
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Loadbard is an open-source printed circuit board by cmjonze, from the cmjonze/loadboard repository on GitHub. It is a 2-layer board of 71.1 × 58.4 mm with 35 parts on 38 nets, routed with 134 tracks and 0 vias.
Its parts include 24 resistors and 11 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 | |
| 9 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J7, J8, J10, J11 | |
| 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 | |
| 1 | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J6 |
It measures 71.1 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cmjonze/loadboard repository on GitHub, at the commit this page was made from: the board is loadbard.kicad_pcb and its schematic loadbard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cmjonze before reusing the design.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.



