
ATtinyDemoBoard
CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

A group of educational projects to promote hardware and software development.
ATtiny8SIOCbg is an open-source printed circuit board by CmdrZin, from the CmdrZin/Educational-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 17.8 × 14 mm with 3 parts on 8 nets.
It is built around the ATTINY212-SSN. Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A group of educational projects to promote hardware and software development. Zip files of projects can be found at https://www.gameactive.org/dist/
==================
Educational projects
| Name | Description |
|---|---|
| IntroToArduino | An Educational package on how to program using the Arduino IDE. |
| Beyond Arduino | A guide to learning the AVR series of microcontrollers. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | ATtiny212-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

jostsalathe/ctfl-rakete-pcb
Converting this sticker desing into a PCB that lights up its flame and lighthouse top from the bottom side using some LEDs and a coin cell battery.

TehoorMarjan/Ignis
An autonomous flame-shaped lamp/nightlight controlled by microcontroller with WS2812B LED ring and integrated Qi wireless charging. 🔥


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

It measures 17.8 × 14 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the ATTINY212-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CmdrZin/Educational-Projects repository on GitHub, at the commit this page was made from: the board is BeyondArduino/KiCad/ATtiny8SIOCbg/ATtiny8SIOCbg.kicad_pcb and its schematic BeyondArduino/KiCad/ATtiny14SIOC/ATtiny14SIOC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).