
ATtinyDemoBoard
CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

A group of educational projects to promote hardware and software development.
ATtiny14SIOC is an open-source printed circuit board by CmdrZin, from the CmdrZin/Educational-Projects repository on GitHub, published under the MIT licence. It is a 2-layer board of 16.5 × 19 mm with 3 parts on 14 nets, routed with 45 tracks and 2 vias.
It is built around the ATTINY814-SSN. Its parts include 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A group of educational projects to promote hardware and software development. Zip files of projects can be found at https://www.gameactive.org/dist/
==================
Educational projects
| Name | Description |
|---|---|
| IntroToArduino | An Educational package on how to program using the Arduino IDE. |
| Beyond Arduino | A guide to learning the AVR series of microcontrollers. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | ATtiny814-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.

CmdrZin/Educational-Projects
A group of educational projects to promote hardware and software development.


malik019/horloge-accelerometer
Een compact, ultra-low-power PCB-ontwerp in KiCad voor een klok (horloge). Maakt gebruik van een ATtiny MCU, een ST LIS2DW12 accelerometer voor bewegingsdetectie en WS2812B-MINI RGB-leds


OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences



Gamu2124/RoboCupJunior2026-RobotDatas
Complete data for the robot that won the Japan and World championships / 日本大会優勝 & 世界大会優勝したロボットの全データ

It measures 16.5 × 19 mm and has 2 copper layers, 1.6 mm thick.
3 parts, built around the ATTINY814-SSN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CmdrZin/Educational-Projects repository on GitHub, at the commit this page was made from: the board is BeyondArduino/KiCad/ATtiny14SIOC/ATtiny14SIOC.kicad_pcb and its schematic BeyondArduino/KiCad/ATtiny14SIOC/ATtiny14SIOC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).