
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

battery eliminator circuit for a vacuum tube voltmeter. Isolated, protected, doesn't load the filament transformer.
VTVMbattElim is an open-source printed circuit board by clytle374, from the clytle374/VTVM-Battery-Eliminator repository on GitHub. It is a 2-layer board of 50 × 26.2 mm with 22 parts on 9 nets, routed with 82 tracks and 252 vias.
It is built around the ZPI03S0600WC. Its parts include 4 resistors, 3 capacitors, 3 diodes, 1 IC and 1 fuse.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TestPoint | Connector_Pin:Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork | TP1, TP2, TP3, TP4 |
| 3 | .1U | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C4 |
| 2 | A7 | Parts:D_SOD-123F-HandSolder | D1, D2 |
| 1 | 0034.6000 | Fuse:Fuse_Schurter_UMT250 | F2 |
| 1 | 1500 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 200 | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 240 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | LM317_SOT-223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | SMAJ6.5A-13-F | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D3 |
| 1 | ZPI03S0600WC | Parts:ZPI03S0600WC | PS1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 50 × 26.2 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the ZPI03S0600WC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clytle374/VTVM-Battery-Eliminator repository on GitHub, at the commit this page was made from: the board is VTVMbattElim.kicad_pcb and its schematic VTVMbattElim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask clytle374 before reusing the design.