2 layers40 × 79.6 mm
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
48 parts915
2 layers85 × 54 mm
Business card pi pico
clovisf/business-card-hackaday-contest1uC business card for Hackaday contest
- Size
- 85 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 44
- Pads
- 188
- Tracks, vias
- 218, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 May 2024
- Updated
- 18 Oct 2024
Overview
Business card pi pico is an open-source printed circuit board by clovisf, from the clovisf/business-card-hackaday-contest repository on GitHub. It is a 2-layer board of 85 × 54 mm with 48 parts on 44 nets, routed with 218 tracks and 29 vias.
Its parts include 36 diodes, 9 resistors, 1 IC, 1 connector and 1 switch. It belongs with the RP2040 boards of this library.
README
README.mdbusiness-card-hackaday-contest
uC business card for Hackaday contest
This is my try on an electronic business card for the 2024 Hackaday business card contest
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 9 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 1 | Conn_01x04_Pin | SSD1306:128x64OLED | J1 |
| 1 | Pico | Pi Pico:RPi_Pico_SMD_TH | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1 |
Similar boards
- 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers18.8 × 18.1 mm
- 2 layers48.1 × 115.6 mm
- 2 layers106 × 55 mm
Endcap
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
48 parts384 - 2 layers42.8 × 88 mm
18650 pcb
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
48 parts253GPL-3.0 - 2 layers34 × 44 mm
Clk lo buffer
loxodes/vna
Under development open hardware microwave vector network analyzer
48 parts205 - 2 layers70.6 × 189.2 mm
Nano
fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
48 parts175
Questions
How big is the Business card pi pico PCB?
It measures 85 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Business card pi pico use?
48 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Business card pi pico KiCad files?
From the clovisf/business-card-hackaday-contest repository on GitHub, at the commit this page was made from: the board is business-card-pi-pico-pcb/business-card-pi-pico.kicad_pcb and its schematic business-card-pi-pico-pcb/business-card-pi-pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Business card pi pico design in my own project?
Its repository states no licence, so its author keeps all rights: ask clovisf before reusing the design.