

Cloudtest
Just me building some sort of Afterburner
- Size
- 32.2 × 26.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 16
- Pads
- 23
- Tracks, vias
- 15, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Feb 2025
- Updated
- 9 Mar 2026
Overview
Cloudtest is an open-source printed circuit board by cloudUwU05, from the cloudUwU05/AfterBurner repository on GitHub. It is a 2-layer board of 32.2 × 26.3 mm with 3 parts on 16 nets, routed with 15 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdAfterBurner
This is my backup/posting of my little Afterburner test piece,
Its not great but i have seen worse
Testing vid on my youtube AfterburnerTest
Also some pics

I have used the following Materials:
| Steeltube | Acrylictube | |
|---|---|---|
| Outer Diameter | 6cm | 6.5cm |
| Length | 16cm | 29cm |
| thickness | 2.75mm | 3.6mm |
The Stl files for the pipeclamps etc are all in the Stl folder
The PCB is finally working, i scraped the power part, but the 5V from the ESC controller should be enough
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Display | Library:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ESP32-C3_SUPERMINI_TH | Library:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | PulseIn | Library:PinHeader_1x03_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Cloudtest PCB?
It measures 32.2 × 26.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cloudtest use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cloudtest KiCad files?
From the cloudUwU05/AfterBurner repository on GitHub, at the commit this page was made from: the board is PCB/cloudtest.kicad_pcb and its schematic PCB/cloudtest.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cloudtest design in my own project?
Its repository states no licence, so its author keeps all rights: ask cloudUwU05 before reusing the design.