Skip to the content
2 layers173.4 × 73.7 mmCGS36 Pulse Divider, the printed circuit board in 3D

A modifed version of the the CGS36 pulse divider and Boolean logic module with modifications to the low impedance / high current output circuitry and logic gates

Size
173.4 × 73.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
170
Nets
159
Pads
475
Tracks, vias
644, 5
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
3 Jul 2024
Updated
18 Nov 2024

Overview

CGS36 Pulse Divider is an open-source printed circuit board by clarionut, from the clarionut/Pulse_Divider_Boolean_Logic repository on GitHub. It is a 2-layer board of 173.4 × 73.7 mm with 170 parts on 159 nets, routed with 644 tracks and 5 vias.

It is built around the LM324 and TL084. Its parts include 78 resistors, 37 diodes, 14 connectors, 13 capacitors and 13 transistors.

Main components

2

README

README.md

Pulse Divider and Boolean Logic

A synthesizer module based on the original CGS36 circuit.

I was particularly concerned about high current consumption as the original outputs put 15V across a potential divider with a total resistance of 2.8k. Even at Eurorack levels of 12V that's over 4mA per 'on' output, not counting the LEDs. Instead I powered the outputs from a dedicated 78L09 9V supply (I like strong gate/trigger signals) and removed the resistor chain to ground.

The pulse divider now has a /1 output, which is a buffered copy of the incoming clock at the same voltage level as the divided outputs.

There are significant changes to the logic gates too

  • the AND and OR gates have the same modification to their outputs as the pulse divider stages
  • the original XOR gate can only compare signals of approximately the same voltage. This version has a voltage conditioner on its inputs (using op-amp comparators), allowing a wider range of input signals to be processed.
  • the XOR comparator / output stage is an LM324 running on +9V
  • the dedicated XNOR circuitry has been removed
  • the NOT gates are replaced by 3 op-amp inverters using the remaining stages of the LM324. These are normalled to the AND, OR and XOR outputs providing NAND, NOR and XNOR functions by default, but can be used to invert any other logic signal for maximum flexibility

For reasons of economy I built the pulse divider and Boolean logic circuits on two separate PCBs. The logic board is daisy-chained from the divider board for its power supply, and also uses two stages of the TL084 as its input voltage conditioner. To build this board as a stand-alone unit will require a redesign with power input circuitry and a TL082 as the voltage conditioner.

Parts

170
QtyValueFootprintReferences
371N914CGE_footprints:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +21
29100kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R4, R5, R10, R12, R13, R35, R37, R38, R42, R43, R45, R49, R53, R54, R56 +13
13200kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR14, R15, R16, R17, R18, R19, R20, R36, R47, R55, R64, R73, R76
112N3904Package_TO_SOT_THT:TO-92_HandSolderQ0, Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q9, Q11, Q12
102k2CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR22, R24, R26, R28, R30, R32, R34, R40, R44, R63
9100nCGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mmC3, C4, C5, C6, C7, C8, C9, C12, C13
833kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR21, R23, R25, R27, R29, R31, R33, R77
547kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR41, R48, R50, R60, R65
415kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R61, R69, R75
41kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR46, R58, R67, R72
44017Package_DIP:DIP-16_W7.62mm_SocketU2, U3, U4, U5
310kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR3, R6, R11
210uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C2
227kCGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR39, R51
22N3906Package_TO_SOT_THT:TO-92_HandSolderQ8, Q10
2FBInductor_THT:L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1FB1, FB2
2LOGOCGE_footprints:CGE_logoG***, G***
110nCGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mmC10
11uCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC11
1AND_INConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ13
1AND_OUTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ11
1CLK/RSTConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1DivLEDSConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ5
1DivOUTConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ6
1FROM_DIVIDERConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ9
1L78L09_TO92Package_TO_SOT_THT:TO-92_HandSolderU6
1LM324Package_DIP:DIP-14_W7.62mm_SocketU7
1NOT_INConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12
1NOT_OUTConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ14
1OR_INConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1OR_OUTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ8
1POWERCGE_footprints:Power_2x05J1
1TL084Package_DIP:DIP-14_W7.62mm_SocketU1
1TO_LOGICConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ4
1XOR_INConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1XOR_OUTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ10

The 166 most common of 170 parts.

Similar boards

  • 2 layers54.5 × 81.5 mmEjun, the printed circuit board in 3D

    Ejun

    expeyes/expeyes-programs

    programs for expeyes and expeyes-junior

    105 parts18
  • 2 layers97.7 × 58 mmBluepill function generator, the printed circuit board in 3D

    Bluepill function generator

    BojanSof/BluePillWaveGen

    DDS function generator build around STM32 BluePill board

    41 parts35
  • 2 layers61 × 61 mmStm32-rfid clone, the printed circuit board in 3D

    Stm32-rfid clone

    joeferner/stm32-rfid-clone

    STM32 RFID Reader / Writer

    112 parts16
  • 2 layers94.5 × 55 mmAdsr 1, the printed circuit board in 3D

    Adsr 1

    hermflink/3310ADSR

    Dual ADSR based on AS3310

    54 parts11GPL-3.0
  • 2 layers105 × 65 mmOsc 3340, the printed circuit board in 3D

    Osc 3340

    petegaggs/MIDI-to-CV

    arduino based MIDI to CV converter

    81 parts9MIT
  • 2 layers78 × 108 mmEuclid+ Main Board, the printed circuit board in 3D

    Euclid+ Main Board

    m0xpd/EUCLIDplus

    EUCLID+ is a Clock Divider, Oscillator and Rhythm Sequencer for electronic music applications

    131 parts7CC-BY-SA-4.0
  • 2 layers450 × 160 mmSquale, the printed circuit board in 3D

    Squale

    jfdelnero/Apollo_7_Squale

    Apollo 7 Squale computer dev tools

    219 parts6
  • 2 layers36.6 × 77.4 mmLicht, the printed circuit board in 3D

    Licht

    microresearch/ERD-breath

    Divinatory smoke and fire based eurorack module.

    41 parts6

Questions

How big is the CGS36 Pulse Divider PCB?

It measures 173.4 × 73.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CGS36 Pulse Divider use?

170 parts, built around the LM324 and TL084. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CGS36 Pulse Divider KiCad files?

From the clarionut/Pulse_Divider_Boolean_Logic repository on GitHub, at the commit this page was made from: the board is Schematics/CGS36_Pulse_Divider.kicad_pcb and its schematic Schematics/CGS36_Pulse_Divider.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CGS36 Pulse Divider design in my own project?

Its repository states no licence, so its author keeps all rights: ask clarionut before reusing the design.