

Mini Speaker Amplifier
A mini speaker for Eurorack synthesizer
- Size
- 30 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 12
- Pads
- 57
- Tracks, vias
- 63, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Jul 2019
- Updated
- 16 Apr 2024
Overview
Mini Speaker Amplifier is an open-source printed circuit board by clacktronics, from the clacktronics/EuroClack_Speaker repository on GitHub. It is a 2-layer board of 30 × 48 mm with 20 parts on 12 nets, routed with 63 tracks and 0 vias.
Its parts include 6 capacitors, 4 connectors, 2 resistors and 1 IC. It belongs with the audio and music boards of this library.
README
README.md
Clacktronics Mini-Speaker Kit
This project is a simple audio monitor module for your Eurorack. It consists of a speaker driver mounted onto an FR4 panel with an amplifier board. Much like the EDP Wasp or the Arp 2600, It will not be the most high definition speaker, especially lacking at the low end, but it is handy for when you may not be able to access your monitors or if you are using a small portable system.
As a kit it is designed to be simple and fast to assemble, so ideal for beginners. There are only a handful of components to solder so should give fast gratification and troubleshooting should be simple. The speaker is exactly 30.5mm wide which means it just fits into the 6HP (30mm) panel width.
- Width: 6HP
- Height: 3U
- Depth: 50mm
- Current draw idle: 5mA(+12V) 0mA(-12V) 0mA(5V)
- Current draw Active: 80mA(+12V) 0mA(-12V) 0mA(5V) (driven with 10Vpp square wave at 500kHz)
More information at clacktronics.co.uk/euroclack
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Clacktronics:C_TH_Disc_P5.00mm | C1, C3, C5 |
| 2 | 10k | Clacktronics:POT_TH_Alps_RK09K_Single_Vertical | RV1, RV1 |
| 2 | 10μF | Clacktronics:C_TH_Elec_5mm_P2mm | C2, C7 |
| 2 | AudioJack2 | Clacktronics:PJ398SM | J1, J1 |
| 1 | 10 | Clacktronics:R_TH_Axial_250mw_P10.16mm_Horizontal | R2 |
| 1 | 1000μF | Clacktronics:C_TH_Elec_10mm_P5mm | C4 |
| 1 | 470k | Clacktronics:R_TH_Axial_250mw_P10.16mm_Horizontal | R1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | LM386-4 | Clacktronics:DIP-8_W7.62mm | U1 |
| 1 | LOGO | Clacktronics:cone | G*** |
| 1 | LOGO | Clacktronics:face | G*** |
| 1 | LOGO | Clacktronics:clacktronics_logo_11mm | G*** |
| 1 | Speaker | Clacktronics:Conn_speaker_pads | LS1 |
The 19 most common of 20 parts.
Similar boards
- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm

Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm

FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Mini Speaker Amplifier PCB?
It measures 30 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mini Speaker Amplifier use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini Speaker Amplifier KiCad files?
From the clacktronics/EuroClack_Speaker repository on GitHub, at the commit this page was made from: the board is Mini-Speaker_Amplifier/Mini-Speaker_Amplifier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini Speaker Amplifier design in my own project?
Its repository states no licence, so its author keeps all rights: ask clacktronics before reusing the design.