4 layers51 × 45 mm
Flight controller atlas
williamjroche/Drone_Flight_Controller
This is a GPS-Denied Autonomous Drone that uses computer vision to fly with radio transmission override. Autonomy is a work in progress.
66 parts1MIT
2 layers7.1 × 8.1 mm
Board 1 LED
ckessler2/phdPHD stuff
- Size
- 7.1 × 8.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 25
- Pads
- 53
- Tracks, vias
- 93, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Nov 2023
- Updated
- 8 Jul 2026
Overview
Board 1 LED is an open-source printed circuit board by ckessler2, from the ckessler2/phd repository on GitHub. It is a 2-layer board of 7.1 × 8.1 mm with 13 parts on 25 nets, routed with 93 tracks and 0 vias.
It is built around the BMP384 and CSD13385F5. Its parts include 6 connectors, 4 capacitors, 2 ICs and 1 transistor.
Main components
2Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF_X5R | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1uF_0402 | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 4.7uF_X5R | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | BMP384 | footprints:LGA10_2.0X2.0X0.95_BOS | U2 |
| 1 | CSD13385F5 | CSD13385F5:TRANS_CSD13385F5 | Q1 |
| 1 | EYSHSNZWZ_module_stub | EYSHSNZWZ:XCVR_EYSHSNZWZ | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | J4 |
| 1 | LED_DRAIN | TestPoint:TestPoint_Pad_1.0x1.0mm | J6 |
| 1 | RESET | TestPoint:TestPoint_Pad_1.0x1.0mm | J1 |
| 1 | SWDCLK | TestPoint:TestPoint_Pad_1.0x1.0mm | J3 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | J2 |
| 1 | VDD | TestPoint:TestPoint_Pad_1.0x1.0mm | J5 |
Questions
How big is the Board 1 LED PCB?
It measures 7.1 × 8.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board 1 LED use?
13 parts, built around the BMP384 and CSD13385F5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board 1 LED KiCad files?
From the ckessler2/phd repository on GitHub, at the commit this page was made from: the board is UW_Flier/Board_1_LED/Board_1_LED.kicad_pcb and its schematic UW_Flier/Board_1_LED/Board_1_LED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board 1 LED design in my own project?
Its repository states no licence, so its author keeps all rights: ask ckessler2 before reusing the design.
Similar boards
- 4 layers56.2 × 70.5 mm
- 4 layers56 × 52 mm
EdgeLink S3 Cellular
CDonohoe-Designs/EdgeLink_S3_Cellular
EdgeLink S3 Cellular is a four-layer embedded hardware platform combining an ESP32-S3 controller, SIM7080G cellular/GNSS modem, USB-C, battery power management and environmental/motion sensing.
114 parts - 4 layers39.4 × 39.4 mm
- 4 layers82 × 82 mm
- 2 layers140.5 × 70 mm
AmbiSense
TwoCoolCole12/Half-Life-Week-1-PCB-AmbiSense
A portable environment sensor to sense ambient temperature, humidity, light, movement speed, and more!
37 parts - 4 layers65 × 56 mm
Canary hat
danbrunski/canary
Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.
66 parts - 2 layers40 × 20 mm
