2 layers52 × 29 mm
2 layers100 × 92.6 mm
Breakouts
cjlano/breakoutsBreakouts board
- Size
- 100 × 92.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 171
- Pads
- 609
- Tracks, vias
- 1,428, 112
- Pours
- 24
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 19 Oct 2013
- Updated
- 26 Feb 2014
Overview
Breakouts is an open-source printed circuit board by cjlano, from the cjlano/breakouts repository on GitHub. It is a 2-layer board of 100 × 92.6 mm with 165 parts on 171 nets, routed with 1,428 tracks and 112 vias.
It is built around the FT230XQ-R, MCP7940M-I/P and TDA1517ATW. Its parts include 44 capacitors, 34 connectors, 32 resistors, 14 diodes and 11 ICs. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
FT230XQ-R
QFN-16-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-16-EP(4x4) USB Converters ROHSFTDIUSB Converters
MCP7940M-I/P
PDIP-8-40℃~+85℃ 1.8V~5.5V I2C Temperature compensation、InsideSRAM/NVRAM、Programmable clock output、Alarm function PDIP-8 Real Time Clocks ROHSMicrochip TechnologyReal Time ClocksTDA1517ATW
HTSSOP20HTSSOP20 New Arrivals ROHSNXP SemiconductorsUncategorised
Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | SMD0805 | C301, C701, C702, C801, C802, C901, C1001, C1101, C1201, C1203, C1205, C1303 |
| 7 | 1k | SMD0603 | R201, R701, R702, R803, R804, R901, R902 |
| 7 | 47pF | SMD0805 | C303, C304, C305, C401, C1103, C1104, C1105 |
| 7 | footprint | footprint-15 | G*, G*, G*, G*, G*, G*, G* |
| 6 | 22pF | SMD0805 | C703, C704, C804, C805, C1301, C1302 |
| 6 | CONN_2 | pin_array_2x1 | P201, P202, P203, P501, P502, P1301 |
| 5 | 10k | SMD0603 | R703, R805, R903, R1201, R1301 |
| 5 | footprint | footprint-10 | G*, G*, G*, G*, G* |
| 4 | 270R | SMD0603 | R301, R302, R1101, R1102 |
| 4 | 27R | SMD0603 | R304, R305, R1104, R1105 |
| 4 | CONN_3 | pin_array_3x1 | K601, K801, K1201, K1301 |
| 4 | CONN_6 | pin_array_6x1 | P301, P302, P1101, P1102 |
| 4 | LED | LED-0805 | D301, D302, D1101, D1102 |
| 4 | USB_MINI-B | mini-USB | J201, J301, J801, J1101 |
| 3 | 0R | SMD0603 | R303, R501, R1103 |
| 3 | CONN_2 | Screw_Terminal_Block_2P | P1201, P1202, P1203 |
| 3 | CONN_8 | pin_array_8x1 | P401, P402, P901 |
| 3 | ISP | pin_array_3x2 | P705, P804, P902 |
| 3 | POWER | LED-0805 | D702, D802, D902 |
| 3 | RESET | LED-0805 | D701, D801, D901 |
| 2 | 1000uF 16V | C_radial_10mm | C1204, C1206 |
| 2 | 10µF | SMD0805 | C601, C602 |
| 2 | 2.2k | SMD0603 | R1302, R1303 |
| 2 | 22R | SMD0603 | R801, R802 |
| 2 | 22µF | SMD0805 | C501, C503 |
| 2 | 3V6 | SOD123F | D202, D203 |
| 2 | 4.7uF | SMD0805 | C302, C1102 |
| 2 | 68R | SMD0603 | R203, R204 |
| 2 | CONN_4 | pin_array_4x1 | P1001, P1002 |
| 2 | PORT B | pin_array_8x1 | P702, P801 |
| 2 | PORT C | pin_array_8x1 | P703, P802 |
| 2 | PORT D | pin_array_8x1 | P704, P803 |
| 2 | SW_PUSH | PUSH_BUTTON-TECon | SW701, SW901 |
| 2 | VAL** | slot-10mm | slot-10mm, slot-10mm |
| 1 | 0.01µF | SMD0805 | C402 |
| 1 | 1.2pF | SMD0805 | C405 |
| 1 | 1000uF 25V | C_radial_10mm | C1202 |
| 1 | 100nH | SMD0805 | L401 |
| 1 | 100uF | SMD0805 | C1207 |
| 1 | 10MHz | HC49US | X401 |
| 1 | 10uF | SMD0805 | C201 |
| 1 | 12MHz | HC49US | X701 |
| 1 | 16MHz | HC49US | X801 |
| 1 | 1M | SMD0603 | R205 |
| 1 | 1k5 | SMD0603 | R202 |
| 1 | 1nF | SMD0805 | C404 |
| 1 | 1uF | SMD0805 | C803 |
| 1 | 2.2µF | SMD0805 | C403 |
| 1 | 2.7pF | SMD0805 | C407 |
| 1 | 22nH | SMD0805 | L403 |
| 1 | 22µH | Shielded_inductor | L501 |
| 1 | 27pF | SMD0805 | C406 |
| 1 | 32.768kHz | AB38T_Crystal | X1301 |
| 1 | 8.2k | SMD0603 | R1202 |
| 1 | 8.2nH | SMD0805 | L402 |
| 1 | ATMEGAx8 | TQFP32-0.8mm | U701 |
| 1 | ATMEGAxU2 | TQFP32-0.8mm | U801 |
| 1 | ATTINY85-S | SOIC-8 | IC901 |
| 1 | DIODESCH | SOD-123 | D501 |
| 1 | FT230X | QFN-16 | U1101 |
| 1 | FT230X | SSOP-16 | U301 |
| 1 | JACK_5P | JACK_3.5mm | J1201 |
| 1 | MCP7940M | SOIC-8_Narrow_3.90mm | U1301 |
| 1 | MRF49XA | TSSOP-16 | U401 |
| 1 | NX1117C33Z | SOT223 | U601 |
| 1 | Open | SMD0805 | C502 |
| 1 | POWER | pin_array_8x1 | P701 |
| 1 | PWR | LED-0805 | D201 |
| 1 | RESET | PUSH_BUTTON-TECon | SW801 |
| 1 | SMA | PCBedge_SMA | J401 |
| 1 | SP6641A | SOT-23 | U501 |
| 1 | SST25VF016B | SOIC-8 | U1001 |
| 1 | TDA1517ATW | TSSOP-20 | U1201 |
| 1 | VAL** | BMIS-203_Shield | BMIS-203_Shield |
Questions
How big is the Breakouts PCB?
It measures 100 × 92.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakouts use?
165 parts, built around the FT230XQ-R, MCP7940M-I/P and TDA1517ATW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakouts KiCad files?
From the cjlano/breakouts repository on GitHub, at the commit this page was made from: the board is breakouts.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakouts design in my own project?
Its repository states no licence, so its author keeps all rights: ask cjlano before reusing the design.
Similar boards
- 2 layers124.5 × 2.5 mm
- 8 layers120 × 60 mm
Jetson orin baseboard
antmicro/jetson-orin-baseboard
Baseboard targetting the NVIDIA Jetson Orin Nano and Jetson Orin NX
681 parts305Apache-2.0 - 4 layers22.5 × 30 mm
- 2 layers61.8 × 48.5 mm
- 2 layers20.3 × 20.3 mm
Test data
nerdyscout/kicad-exports
Auto generate exports (schematics, gerbers, plots) for any KiCAD5 project.
7 parts79MIT - 2 layers25.4 × 21.8 mm
SomfySituo5IoAdapter
Yadoms/yadoms
Yadoms is open source, simple, powerfull, flexible and multiplatforms domotic solution.
30 parts62 - 10 layers180 × 100 mm
Jetson agx thor baseboard
antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module
1,213 parts48Apache-2.0