2 layers90 × 70 mm
Rvm interface pcb
zk946190-ui/rvm-interface-pcb
KiCad schematic and PCB layout for an interface board that connects an Arduino Mega to the sensors, actuators and communication modules of a Reverse Vending Machine (RVM).
25 parts
2 layers68.1 × 38.1 mm
RaspiConnectorBoard
CitizenSensor/CitizenSensor8Main repository of the CitizenSensor project
- Size
- 68.1 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 35
- Pads
- 58
- Tracks, vias
- 63, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2019
- Updated
- 15 Feb 2022
Overview
RaspiConnectorBoard is an open-source printed circuit board by CitizenSensor, from the CitizenSensor/CitizenSensor repository on GitHub. It is a 2-layer board of 68.1 × 38.1 mm with 7 parts on 35 nets, routed with 63 tracks and 0 vias.
It is built around the HX711 and BC547. Its parts include 4 connectors, 1 resistor, 1 diode and 1 transistor.
Main components
2README
4_ConnectorBoard/README.mdConnector Board
The connector board is a small PCB that sits on top of the CitizenSensor Raspberry Pi HAT and connects additional components to the Raspberry Pi, namely:
- HX711 breakout board to connect the load cell
- KY040 rotary encoder
- Motor for the magnetic stirrer
Bill of Material
| Item | Description | Amount | Comment |
|---|---|---|---|
| J0 | Raspberry Pi Connector | 1 | 40 pins |
| J1 | Pin Header 90° 1x4 | 1 | 2.54 mm raster |
| J2 | Pin Header 90° 1x5 | 1 | 2.54 mm raster |
| J3 | Pin Header 90° 1x2 | 1 | 2.54 mm raster |
| R1 | 1K resistor | 1 | |
| D1 | 1N4004 diode | 1 | |
| Q1 | BC547 | 1 |
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1N4004 | Diode_THT:D_T-1_P10.16mm_Horizontal | D1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | HX711 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | KY040 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J2 |
| 1 | MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J0 |
Questions
How big is the RaspiConnectorBoard PCB?
It measures 68.1 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RaspiConnectorBoard use?
7 parts, built around the HX711 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RaspiConnectorBoard KiCad files?
From the CitizenSensor/CitizenSensor repository on GitHub, at the commit this page was made from: the board is 4_ConnectorBoard/RaspiConnectorBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RaspiConnectorBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask CitizenSensor before reusing the design.
Similar boards
- 2 layers15.3 × 19.3 mm
Kicad hx711 tyny85
IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.
18 parts150GPL-3.0 - 2 layers109.2 × 74.9 mm
- 4 layers81.2 × 81.2 mm
- 2 layers128 × 77 mm
- 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers112 × 57 mm
Caravansensor
MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.
226 parts17 - 2 layers71.1 × 109.2 mm
