Skip to the content
2 layers43 × 29 mmControl logic module, the printed circuit board in 3D

MOS KIM-1 6502 replica project using CHIPz modules.

Size
43 × 29 mm
Copper layers
2
Thickness
0.8 mm
Parts
47
Nets
40
Pads
145
Tracks, vias
321, 92
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Jul 2025
Updated
4 Nov 2025

Overview

Control logic module is an open-source printed circuit board by CircuitMonkey, from the CircuitMonkey/mos-kim1-replica repository on GitHub, published under the MIT licence. It is a 2-layer board of 43 × 29 mm with 47 parts on 40 nets, routed with 321 tracks and 92 vias.

It is built around the MC74HC1G00DFT1GH, 74HC04D and TLC556CD, with the ASD-8.000MHZ-LC-T among its other parts. Its parts include 13 resistors, 7 capacitors, 5 ICs and 1 crystal.

Main components

4

README

README.md

mos-kim1-replica

MOS KIM-1 6502 replica project using CHIPz modules.

Parts

47
QtyValueFootprintReferences
93.3KResistor_SMD:R_0603_1608MetricR1, R2, R3, R4, R5, R8, R9, R10, R11
30.1uFCapacitor_SMD:C_0603_1608MetricC1, C6, C7
20.22uFCapacitor_SMD:C_0603_1608MetricC4, C5
21KResistor_SMD:R_0603_1608MetricR6, R7
247KResistor_SMD:R_0603_1608MetricR12, R13
274AHC1G00Package_TO_SOT_SMD:SOT-353_SC-70-5U2, U3
10.01uFCapacitor_SMD:C_0603_1608MetricC3
14.7uFCapacitor_SMD:C_0603_1608MetricC2
174HC04CM_Chip_Packages:QFN-14_EP_2.5x3_Pitch0.5mmU1
174LS145Package_SO:SO-16_3.9x9.9mm_P1.27mmU5
18MHzOscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mmY1
1A10CM_Connector_Castelated:cast-2.0-01PCST8
1A11CM_Connector_Castelated:cast-2.0-01PCST9
1A12CM_Connector_Castelated:cast-2.0-01PCST10
1APPLICATIONCM_Connector_Castelated:cast-2.0-10PCST19
1E-17CM_Connector_Castelated:cast-2.0-01PCST13
1GNDCM_Connector_Castelated:cast-2.0-01PCST2
1IRQCM_Connector_Castelated:cast-2.0-01PCST4
1R/~{W}CM_Connector_Castelated:cast-2.0-01PCST12
1RAM-R/~{W}CM_Connector_Castelated:cast-2.0-01PCST16
1RSCM_Connector_Castelated:cast-2.0-01PCST20
1STCM_Connector_Castelated:cast-2.0-01PCST21
1SYNCCM_Connector_Castelated:cast-2.0-01PCST3
1TLC556Package_SO:SO-14_3.9x8.65mm_P1.27mmU4
1VccCM_Connector_Castelated:cast-2.0-01PCST1
1~{NMI}CM_Connector_Castelated:cast-2.0-01PCST6
1~{RDY}CM_Connector_Castelated:cast-2.0-01PCST5
1~{RST}CM_Connector_Castelated:cast-2.0-01PCST7
1ΨR/~{W}CM_Connector_Castelated:cast-2.0-01PCST14
1Ψ~{R}/WCM_Connector_Castelated:cast-2.0-01PCST15
1Ψ~{Φ2}CM_Connector_Castelated:cast-2.0-01PCST18
1ΨΦ2CM_Connector_Castelated:cast-2.0-01PCST17
1μΦ2CM_Connector_Castelated:cast-2.0-01PCST11

More from CircuitMonkey/mos-kim1-replica

3
  • 2 layers137 × 197 mmMos kim1-replica, the printed circuit board in 3D

    Mos kim1-replica

    CircuitMonkey/mos-kim1-replica

    MOS KIM-1 6502 replica project using CHIPz modules.

    103 parts1MIT
  • 2 layers56 × 126 mmKbd display module, the printed circuit board in 3D

    Kbd display module

    CircuitMonkey/mos-kim1-replica

    MOS KIM-1 6502 replica project using CHIPz modules.

    83 parts1MIT
  • 2 layers24 × 42 mmSram-32kx8-module, the printed circuit board in 3D

    Sram-32kx8-module

    CircuitMonkey/mos-kim1-replica

    MOS KIM-1 6502 replica project using CHIPz modules.

    22 parts1MIT

Similar boards

  • 2 layers58.9 × 66.5 mmNeopixel punk main, the printed circuit board in 3D

    Neopixel punk main

    astuder/neopixel-punk-console

    Blinking RGB LEDs with 555s and a handful of 74-series logic

    53 partsMIT
  • 2 layersClock, the printed circuit board in 3D

    Clock

    Velko/8-bit-CPU

    Homebrew 8-bit CPU

    32 parts16MIT
  • 6 layers145 × 355 mmBackplane, the printed circuit board in 3D

    Backplane

    stockmann-lab/shim_amp_hardware_linear

    Hardware related to open-source shim amplifier development for MRI research

    529 parts2
  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers312 × 140 mmTsynth2 Rev1.3, the printed circuit board in 3D

    Tsynth2 Rev1.3

    Electrotechnique/TSynth-Teensy4.1

    TSynth for Teensy 4.1

    108 parts182
  • 2 layers138 × 96.9 mmISA Card, the printed circuit board in 3D

    ISA Card

    AkBKukU/CM153-Repro

    A reproduction of the Philips CM-153 LMSI controller

    161 parts145

Questions

How big is the Control logic module PCB?

It measures 43 × 29 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Control logic module use?

47 parts, built around the MC74HC1G00DFT1GH, 74HC04D, TLC556CD and ASD-8.000MHZ-LC-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control logic module KiCad files?

From the CircuitMonkey/mos-kim1-replica repository on GitHub, at the commit this page was made from: the board is pcb/control-logic-module/control-logic-module.kicad_pcb and its schematic pcb/control-logic-module/control-logic-module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control logic module design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).