
Synth chipz klein vcf
CircuitMonkey/CHIPs
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.

This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.
Synth chipz mod dual is an open-source printed circuit board by CircuitMonkey, from the CircuitMonkey/CHIPs repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 22 × 14 mm with 19 parts on 14 nets, routed with 93 tracks and 21 vias.
Its parts include 5 resistors, 2 capacitors and 1 IC. It belongs with the audio and music boards of this library.
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.
The design is based on a Moog circuit.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | CM_Resistor_Capacitor:R_0603_1608Metric | R1, R2, R3, R4, R5 |
| 2 | 0.1uF | CM_Resistor_Capacitor:C_0603_1608Metric | C1, C2 |
| 1 | +V | CM_Connector_Castelated:cast-2.0-01P | CST9 |
| 1 | -V | CM_Connector_Castelated:cast-2.0-01P | CST11 |
| 1 | BUF_IN_DN | CM_Connector_Castelated:cast-2.0-01P | CST6 |
| 1 | BUF_IN_DP | CM_Connector_Castelated:cast-2.0-01P | CST8 |
| 1 | BUF_OUT_D | CM_Connector_Castelated:cast-2.0-01P | CST7 |
| 1 | GND | CM_Connector_Castelated:cast-2.0-01P | CST10 |
| 1 | TL074 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | VCF_MOD_SRC | CM_Connector_Castelated:cast-2.0-01P | CST4 |
| 1 | VCF_N | CM_Connector_Castelated:cast-2.0-01P | CST5 |
| 1 | VCF_P | CM_Connector_Castelated:cast-2.0-01P | CST3 |
| 1 | VCO DEST INPUT | CM_Connector_Castelated:cast-2.0-01P | CST1 |
| 1 | VCO_MOD_SRC | CM_Connector_Castelated:cast-2.0-01P | CST2 |

CircuitMonkey/CHIPs
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.

CircuitMonkey/CHIPs
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.

CircuitMonkey/CHIPs
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.

CircuitMonkey/CHIPs
This module is a CHIPz implementation of a Envelope Gate. Featuring Attack and Decay controls.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
It measures 22 × 14 mm and has 2 copper layers, 0.8 mm thick.
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CircuitMonkey/CHIPs repository on GitHub, at the commit this page was made from: the board is Synth/synth-chipz-mod-dual/synth-chipz-mod-dual.kicad_pcb and its schematic 0131-dcdc-3a/PCB-KiCAD/0131-dcdc-3a/0131-dcdc-3a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).