2 layers85 × 76.7 mm
TangNano PmodBase
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
34 parts10CC-BY-4.0
2 layers40 × 70 mm
Pmod MatrixLED
ciniml/TangFPGAExtensions10Extension boards for Tang series FPGA boards
- Size
- 40 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 26
- Pads
- 90
- Tracks, vias
- 115, 41
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2023
- Updated
- 2 Aug 2024
Overview
Pmod MatrixLED is an open-source printed circuit board by ciniml, from the ciniml/TangFPGAExtensions repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 40 × 70 mm with 14 parts on 26 nets, routed with 115 tracks and 41 vias.
Its parts include 8 resistors, 2 connectors and 1 IC.
README
README.mdExtension boards for Tang series FPGA boards.
概要
Sipeedが製造・販売している、Tang Nano 9K, Tang Nano 20K およびTang Primer 20K向けのベースボードおよび拡張基板の設計データです。
内容
対象ボード
基板一覧
| 名前 | 対象ボード | 説明 | KiCadプロジェクト | リビジョン |
|---|---|---|---|---|
| Tang Nano 9K Pmod Base Board | TN9K | Tang Nano 9K用のPmod接続用ベースボード | TangNano_PmodBase.kicad_pro | Rev. B |
| Tang Primer 20K Pmod Extender | TP20K | Tang Primer 20K用のPmod接続用拡張基板 | TangPrimer_PmodExtender.kicad_pro | Rev. B |
| Pmod Debug Board | TN9K,TP20K | Pmodのデバッグ用中継基板 | Pmod_Debug.kicad_pro | Rev. A |
| Pmod HUB75 Connector Board | TN9K,TP20K | HUB75 LED Matrix接続用Pmod基板 | Pmod_HUB75.kicad_pro | Rev. A |
| Pmod LED Board | TN9K,TP20K | Pmodのデバッグ用LED基板 | Pmod_LED.kicad_pro | Rev. A |
| Pmod Matrix LED | TN9K,TP20K | 8x8単色LEDマトリクスPmod基板 | Pmod_MatrixLED.kicad_pro | Rev. B |
| Pmod MultiSegment (Single Port) | TN9K,TP20K | 6桁7+1セグメントLED Pmod基板 (シングルポート版) | Pmod_MultiSegment_SinglePort.kicad_pro | Rev. A |
| Pmod Adapter Ethernet | TN9K,TP20K | LAN8720 Ethernet PHYボード用 Pmod アダプタ | Pmod_Adapter_Ethernet.kicad_pro | Rev. A |
ライセンス
この 作品 は クリエイティブ・コモンズ 表示 4.0 国際 ライセンスの下に提供されています。
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 470 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal_with_1608metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | Conn_02x06_Top_Bottom | local:Conn_Pmod_Spec_B_Thin | J1, J2 |
| 2 | MountingHole | local:MountingHole_3.2mm_M3_Mask | H1, H2 |
| 1 | Logo_Open_Hardware_Small | local:logo | LOGO1 |
| 1 | OSL641501-AX | local:OSL641501-AX | U1 |
More from ciniml/TangFPGAExtensions
9- 2 layers80 × 76.7 mm
TangNano20K PmodBase
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
34 parts10CC-BY-4.0 - 2 layers40.6 × 32.1 mm
Pmod DisplayPort
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
28 parts10CC-BY-4.0 - 2 layers20.3 × 76.6 mm
Pmod MultiSegment SinglePort
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
14 parts10CC-BY-4.0 - 2 layers17.8 × 34.7 mm
- 2 layers95 × 30.2 mm
TangPrimer PmodExtender
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
11 parts10CC-BY-4.0 - 2 layers40 × 33 mm
- 2 layers27.9 × 24.1 mm
Pmod Adapter Ethernet
ciniml/TangFPGAExtensions
Extension boards for Tang series FPGA boards
4 parts10CC-BY-4.0 - 2 layers17.8 × 32.1 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
Questions
How big is the Pmod MatrixLED PCB?
It measures 40 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod MatrixLED use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod MatrixLED KiCad files?
From the ciniml/TangFPGAExtensions repository on GitHub, at the commit this page was made from: the board is Pmod_MatrixLED.kicad_pcb and its schematic Pmod_Adapter_Ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod MatrixLED design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).