

Dmf-5008-backpack
Controller backpack for Optrex DMF-5008N-S display
- Size
- 82 × 74 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 68
- Nets
- 62
- Pads
- 285
- Tracks, vias
- 462, 45
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Feb 2017
- Updated
- 24 Feb 2023
Overview
Dmf-5008-backpack is an open-source printed circuit board by cillian64, from the cillian64/dmf-5008-backpack repository on GitHub. It is a 4-layer board of 82 × 74 mm with 68 parts on 62 nets, routed with 462 tracks and 45 vias.
It is built around the MIC4830YMM, BSS138 and BAS20. Its parts include 34 resistors, 14 transistors, 8 connectors, 3 capacitors and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
3MIC4830YMM
MSOP-8EL Lamp Driver MSOP-8 Lighting Drivers & Controllers ROHSMicrochip TechnologyLighting Drivers & ControllersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBAS20
SOT-231.25V@200mA 100nA@150V 2.5A 200V 200mA 250mW 50ns Independent SOT-23 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mddmf-5008-backpack
Controller backpack for Optrex DMF-5008N-S display


Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R19, R20, R21, R22, R23, R24, R25 +13 |
| 14 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 2 | 0R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R29, R30 |
| 1 | 10k TRIM | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2.7n C0G 200V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 3V3 IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 5V IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | BAS20 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BOOST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | Bourns SDR0604-221KL | Inductor_SMD:L_Bourns_SRN6045TA | L1 |
| 1 | CONN_01X25 | footprints:lcd_full | P1 |
| 1 | CONN_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | CONN_SPI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | CONN_UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Fiducial | Symbol:Symbol_Barrel_Polarity | SYM2 |
| 1 | MIC4830 | Package_SO:MSOP-8_3x3mm_P0.65mm | U2 |
| 1 | Pico | rp:RPi_Pico_SMD_TH | U1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SEL1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | SYM_Flash_Large | Symbol:Symbol_Highvoltage_Type2_CopperTop_Small | SYM1 |
Similar boards
- 2 layers31 × 16 mm

- 2 layers47 × 62.4 mm

- 4 layers36 × 50.2 mm

Racer
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.
83 parts3.8kApache-2.0 - 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 2 layers54.6 × 70.9 mm

BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers44.2 × 29.3 mm

- 4 layers142.2 × 82.6 mm

A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers21.6 × 52.3 mm

Ps2 pico hat
No0ne/ps2x2pico
USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico
17 parts399MIT
Questions
How big is the Dmf-5008-backpack PCB?
It measures 82 × 74 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Dmf-5008-backpack use?
68 parts, built around the MIC4830YMM, BSS138 and BAS20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dmf-5008-backpack KiCad files?
From the cillian64/dmf-5008-backpack repository on GitHub, at the commit this page was made from: the board is board/dmf-5008-backpack.kicad_pcb and its schematic board/dmf-5008-backpack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dmf-5008-backpack design in my own project?
Its repository states no licence, so its author keeps all rights: ask cillian64 before reusing the design.