
SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

Ponchito (mini-Shield) para Arduino/Galileo
PonchitoCIII is an open-source printed circuit board by ciiiutnfrc, from the ciiiutnfrc/ponchitoCIII repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 53.3 × 35.6 mm with 24 parts on 16 nets, routed with 111 tracks and 0 vias.
Its parts include 9 resistors, 4 connectors, 3 capacitors, 3 diodes and 3 switches.
Este repositorio contiene el diseño de una la placa que cuenta con el hardware necesario para realizar las primeras prácticas en programación sobre sistemas embebidos. Se puede utilizar para el desarrollo de software con los esquemas de sketch de Arduino (con placas Arduino UNO o equivalente), programación en lenguaje C de los microcontroladores AVR de las placas Arduino (sin el IDE Arduino).
Una descripción más detallada se presenta en ponchitoCIII.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | lib_fp:Resistor_Horizontal_RM7mm | R1, R2, R3, R7, R8, R9 |
| 3 | 100n | lib_fp:C_Disc_D6_P5 | C1, C2, C3 |
| 3 | 10K | lib_fp:Resistor_Horizontal_RM7mm | R4, R5, R6 |
| 3 | CONN_01X02 | lib_fp:PinHeader_1x02_P2.54mm_Vertical | P2, P3, P4 |
| 1 | 5K | lib_fp:Potentiometer_Alps-RK16-single | RV1 |
| 1 | CONN_01X04 | lib_fp:PinHeader_1x04_P2.54mm_Vertical | P1 |
| 1 | Logo_CIII | lib_fp:Logo_CIII_Tiny_FSilk | Logo_1 |
| 1 | amarillo | lib_fp:LED-3MM-Yellow | D2 |
| 1 | centro | lib_fp:SW_PUSH_6mm | SW2 |
| 1 | derecho | lib_fp:SW_PUSH_6mm | SW3 |
| 1 | izquierdo | lib_fp:SW_PUSH_6mm | SW1 |
| 1 | rojo | lib_fp:LED-3MM-Red | D1 |
| 1 | verde | lib_fp:LED-5MM-Green | D3 |

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.


rusefi/rusefi
rusefi - GPL internal combustion engine control unit

DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

It measures 53.3 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ciiiutnfrc/ponchitoCIII repository on GitHub, at the commit this page was made from: the board is hardware/ponchitoCIII.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).