ciaa/Ponchos15El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
MIDI is an open-source printed circuit board by ciaa, from the ciaa/Ponchos repository on GitHub. It is a 2-layer board of 85.8 × 137 mm with 136 parts on 137 nets, routed with 765 tracks and 43 vias.
Its parts include 61 resistors, 28 capacitors, 12 switches, 6 ICs and 6 fuses. It belongs with the audio and music boards of this library.
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
Ver información sobre el Poncho en el siguiente PDF:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10k | MIDI:R_0805_HandSoldering | R12, R15, R18, R19, R22, R25, R28, R29, R32, R35, R38, R39, R40, R41, R46, R47 +8 |
| 22 | 100nF | MIDI:C_0805_HandSoldering | C1, C2, C11, C12, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +6 |
| 15 | 1k | MIDI:R_0805_HandSoldering | R14, R24, R34, R42, R43, R44, R45, R50, R51, R52, R53, R58, R59, R60, R61 |
| 12 | SW_PUSH | MIDI:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 6 | 10nF | MIDI:C_0805_HandSoldering | C5, C6, C9, C10, C13, C14 |
| 6 | 18k | MIDI:R_0805_HandSoldering | R11, R16, R21, R26, R31, R36 |
| 6 | 1k @100MHz | MIDI:FB_0805_HandSoldering | FB1, FB2, FB3, FB4, FB5, FB6 |
| 6 | 33k | MIDI:R_0805_HandSoldering | R13, R17, R23, R27, R33, R37 |
| 4 | CONN_1 | MIDI:Hole | H1, H2, H3, H4 |
| 3 | 10K | MIDI:R_0805_HandSoldering | R10, R20, R30 |
| 3 | CONN_1 | MIDI:Fiducial_1mm_TOP | F4, F5, F6 |
| 3 | CONN_1 | MIDI:Fiducial_1mm_BOT | F1, F2, F3 |
| 3 | DIN_5 | MIDI:DIN5_180 | J1, J2, J3 |
| 3 | ENCODER_w_SWITCH | MIDI:ENC_w_SW | U4, U5, U6 |
| 2 | 10R | MIDI:R_0805_HandSoldering | R5, R7 |
| 2 | 33R 0,5W | MIDI:R_0805_HandSoldering | R2, R6 |
| 2 | CONN_01X06 | MIDI:Pin_Header_Straight_1x06_Pitch2.54mm | J4, J5 |
| 1 | 1K | MIDI:R_0805_HandSoldering | R1 |
| 1 | 1N4148 | MIDI:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 220R | MIDI:R_0805_HandSoldering | R3 |
| 1 | 40106 | MIDI:DIP-14_W7.62mm_LongPads | U3 |
| 1 | 4050 | MIDI:DIP-16_W7.62mm_LongPads | U2 |
| 1 | 4K7 | MIDI:R_0805_HandSoldering | R4 |
| 1 | 6N138 | MIDI:DIP-8_W7.62mm_LongPads | U1 |
| 1 | Conn_Poncho2P_20x2_A | MIDI:PIN_ARRAY_20X2 | XA1 |
| 1 | Conn_Poncho2P_20x2_B | MIDI:PIN_ARRAY_20X2 | XB1 |
| 1 | LOGO | MIDI:LOGO | G1 |
| 1 | LOGO | MIDI:nombrePoncho | G*** |
| 1 | LOGO | MIDI:TECLADO | G4 |
| 1 | Logo_Poncho | MIDI:Logo_Poncho | G2 |
| 1 | OSHWA | MIDI:OSHWA | G3 |
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
ciaa/Ponchos
El poncho consta de elemento digitales y analógicos tales como: potenciómetro, buzzer, UART/RS-232, LCD 16x2, teclado matricial 4x3, y pinout para comunicaciones varias y pines de propósito general.
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards
NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
zhol0777/bully-files
Bully is a keyboard designed by paaradiso keyboard design and zhol. It combines low typing angle, a plateless build, and modest but dignified design sensibilities.
It measures 85.8 × 137 mm and has 2 copper layers, 1.6 mm thick.
136 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ciaa/Ponchos repository on GitHub, at the commit this page was made from: the board is MIDI/MIDI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ciaa before reusing the design.