chriz2600/ADV751319This is a small development board for the [Analog Devices ADV7513 HDMI Transmitter][ADV7513]. It's designed to be hand-soldered. I also wrote some code for initialisation (via I2C) in verilog.
ADV7513 is an open-source printed circuit board by chriz2600, from the chriz2600/ADV7513 repository on GitHub, published under the MIT licence. It is a 4-layer board of 91.2 × 41.9 mm with 63 parts on 63 nets, routed with 631 tracks and 24 vias.
It is built around the NCP1117DT18G and NCP1117DT33G. Its parts include 18 capacitors, 8 resistors, 8 connectors, 6 ICs and 4 inductors.
This is a small development board for the Analog Devices ADV7513 HDMI Transmitter. It's designed to be hand-soldered. I also wrote some code for initialisation (via I2C) in verilog. This can be found as part of my Dreamcast HDMI project.
U1: ADV7513
This seems to be a little harder to get from an official distributor, if you are not an HDMI licensee.
You can get it from Aliexpress
U2: NCP1117DT33G
U3: NCP1117DT18G
J1: HDMI Connector
U4, U5, U6: TVS_DIODE
C1, C7, C9, C11, C17, C18: 10u (0805)
C2, C3, C4, C5, C6, C8, C10, C12, C13, C14, C15, C16: 100n (0805)
R1, R2, R5, R6, R7, R8: 2K (0805)
R3: 887R (0805)
R4: 10K (0805)
L1, L2, L3, L4: 10u (1210)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2, C3, C4, C5, C6, C8, C10, C12, C13, C14, C15, C16 |
| 6 | 10u | Capacitors_SMD:C_0805_HandSoldering | C1, C7, C9, C11, C17, C18 |
| 6 | 2K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R5, R6, R7, R8 |
| 4 | 10u | Resistors_SMD:R_1210_HandSoldering | L1, L2, L3, L4 |
| 3 | TVS_DIODE_3.3VWM_10VC_SMD | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U4, U5, U6 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 5V | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P1 |
| 1 | 887R | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | ADV7513 | my-libs:HTQFP-64_1EP_10x10mm_Pitch0.5mm_ThermalPad3 | U1 |
| 1 | AUDIO | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | P4 |
| 1 | BLUE | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | P7 |
| 1 | GREEN | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | P6 |
| 1 | HDMI | hdmi:hdmi_new | J1 |
| 1 | I2C_INT | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P3 |
| 1 | NCP1117DT18G | TO_SOT_Packages_SMD:TO-252-2Lead | U3 |
| 1 | NCP1117DT33G | TO_SOT_Packages_SMD:TO-252-2Lead | U2 |
| 1 | RED | Pin_Headers:Pin_Header_Straight_2x08_Pitch2.54mm | P5 |
| 1 | REF | my-libs:OSHW-logo_10mm | VAL |
| 1 | SYNC | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | P2 |
The 45 most common of 63 parts.
It measures 91.2 × 41.9 mm and has 4 copper layers, 1.6 mm thick.
63 parts, built around the NCP1117DT18G and NCP1117DT33G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chriz2600/ADV7513 repository on GitHub, at the commit this page was made from: the board is kicad/ADV7513.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
kartik2406/rp2040-ble
A PCB that uses RP2040 MCU and HM-BT4502 BLE passthrough module. This enables the RP2040 to communicated with other devices using Bluetooth. The bluetooth module is connected via UART(0)
loxodes/vna
Under development open hardware microwave vector network analyzer
pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.
lab11/signpost
Exploring what happens when you put computers on sign posts.
