Skip to the content
4 layers101.6 × 83.8 mmMTB, the printed circuit board in 3D

PCB files created for 79/80 development

Size
101.6 × 83.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
47
Nets
52
Pads
289
Tracks, vias
505, 106
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
26 May 2017
Updated
20 Jun 2017

Overview

MTB is an open-source printed circuit board by Chris-McElroy, from the Chris-McElroy/PCB-design repository on GitHub. It is a 4-layer board of 101.6 × 83.8 mm with 47 parts on 52 nets, routed with 505 tracks and 106 vias.

Its parts include 8 capacitors, 7 resistors, 7 diodes, 3 fuses and 1 connector.

README

README.md

PCB-design

PCB files created for 79/80 development

Parts

47
QtyValueFootprintReferences
6CP1Capacitors_SMD:C_1206C1, C2, C3, C4, C5, C6
6D_Schottky_x4MTB_footprints:SOT363D1, D2, D3, D4, D5, D6
51.5kΩResistors_SMD:R_0603R1, R2, R3, R4, R5
5LEDLEDs:LED_0603BATTERY LOW, GPS, IMU, SD, TSY
2.35A FuseMTB_footprints:1206F1, F2
23.3V_RegulatorMTB_footprints:VREG3.3V Regulator, 3.3V Regulator
2CMCB_footprints:Standard_CapacitorC7, C8
2TEST_HOLEMCB_footprints:TESTPOINT_LARGET1, T2
1.5A FuseMTB_footprints:1206F3
114kΩResistors_SMD:R_0603R7
12.0A FuseCapacitors_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm2.0A Fuse
134kΩResistors_SMD:R_0603R6
15V_RegulatorMTB_footprints:VREG5V Regulator
1BAT_CONNMTB_footprints:Battery_ConnectorJ1
1BufferHousings_DIP:DIP-14_W7.62mm_SocketBuffer
1Buffer2Housings_DIP:DIP-14_W7.62mm_SocketBuffer
1D_Schottky_TDiodes_SMD:D_0603D7
1GPSMTB_footprints:GPSGPS
1IMUMTB_footprints:IMUIMU
1MB_CONNMTB_footprints:MCBMotor Control Board
1ProtoboardMTB_footprints:PTB_CONNProtoboard
1SwitchMTB_footprints:SwitchS1
1TS881MTB_footprints:SC70COMP
1TeensyMTB_footprints:Teensy-LCTeensy-LC
1microSDMTB_footprints:microSDmicroSD

More from Chris-McElroy/PCB-design

3
  • 2 layers63.5 × 48.3 mm79 Board, the printed circuit board in 3D

    79 Board

    Chris-McElroy/PCB-design

    PCB files created for 79/80 development

    27 parts
  • 2 layers31.5 × 64 mmMyDAQ Breakout Board, the printed circuit board in 3D

    MyDAQ Breakout Board

    Chris-McElroy/PCB-design

    PCB files created for 79/80 development

    16 parts
  • 2 layers31 × 21 mmUnity Gain Buffer, the printed circuit board in 3D

    Unity Gain Buffer

    Chris-McElroy/PCB-design

    PCB files created for 79/80 development

    3 parts

Similar boards

  • 4 layers17.4 × 43.2 mmAmulet encoder, the printed circuit board in 3D

    Amulet encoder

    EPFLXplore/XRE_LeggedRobot_HW

    PCB designs for Xplore Research's robot dog project

    47 parts348Apache-2.0
  • 4 layers41 × 20 mmPmod prbs slow, the printed circuit board in 3D

    Pmod prbs slow

    azonenberg/starshipraider

    Open hardware test equipment

    47 parts193BSD-3-Clause
  • 4 layers67.5 × 9.2 mmRef mic, the printed circuit board in 3D

    Ref mic

    loudifier/OpenRefMic

    open hardware design for a high-performance low-cost measurement microphone

    47 parts169MIT
  • 4 layers67 × 31.3 mmFlipper subg, the printed circuit board in 3D

    Flipper subg

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    47 parts133
  • 4 layers149.9 × 110 mmSch, the printed circuit board in 3D

    Sch

    DownUnderCTF/Challenges_2024_Public

    Files + Solutions for DownUnderCTF 2024 Challenges

    47 parts116
  • 4 layers61.3 × 66.3 mmTerasicDECACape, the printed circuit board in 3D

    TerasicDECACape

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    47 parts73
  • 4 layers100 × 65 mmBefore split, the printed circuit board in 3D

    Before split

    rjwalters/kicad-tools

    Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

    47 parts73MIT
  • 4 layers17.8 × 51.6 mmBonsai C, the printed circuit board in 3D

    Bonsai C

    customMK/Bonsai-C

    An open-source ARM-based microcontroller board

    47 parts71

Questions

How big is the MTB PCB?

It measures 101.6 × 83.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the MTB use?

47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MTB KiCad files?

From the Chris-McElroy/PCB-design repository on GitHub, at the commit this page was made from: the board is MTB/MTB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MTB design in my own project?

Its repository states no licence, so its author keeps all rights: ask Chris-McElroy before reusing the design.