6 layers84 × 98 mm
FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142
2 layers53.3 × 19.9 mm
Shelly1pm programmer
chof747/shelly1pm-programmerSimple programming adapter for a shelly 1pm device via a FTDI Adapter
- Size
- 53.3 × 19.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 9
- Pads
- 29
- Tracks, vias
- 46, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Jul 2024
- Updated
- 21 Aug 2024
Overview
Shelly1pm programmer is an open-source printed circuit board by chof747, from the chof747/shelly1pm-programmer repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 53.3 × 19.9 mm with 7 parts on 9 nets, routed with 46 tracks and 2 vias.
It is built around the UMH3N. Its parts include 3 connectors, 2 switches and 1 transistor. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdshelly1pm-programmer
An adapter to program a Shelly 1 plus with a standard FTDI Programmer
The adapter has the following features:
- A 1.27mm 1x7 pin header to connect to the shelly 1 plus
- A standard header containing the 6 pins needed to program an esp32/esp8266
- An additional 1x2 pin header for the debugging pin
- An UMH3N chip for the auto-reset circutry
- A reset and boot button
Revision History:
- v1.0: Initial version (Produced: 25.07.2024; First assembled: 19.08.2024)
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Boot | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Debug | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | Device Connector | Connector_PinHeader_1.27mm:PinHeader_1x07_P1.27mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | Prog. Hdr. | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | J2 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | UMH3N | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
Questions
How big is the Shelly1pm programmer PCB?
It measures 53.3 × 19.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shelly1pm programmer use?
7 parts, built around the UMH3N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shelly1pm programmer KiCad files?
From the chof747/shelly1pm-programmer repository on GitHub, at the commit this page was made from: the board is shelly1pm-programmer.kicad_pcb and its schematic shelly1pm-programmer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shelly1pm programmer design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers27 × 80 mm
- 2 layers50 × 30 mm
- 2 layers312.5 × 122.3 mm
- 4 layers83 × 109 mm
- 2 layers71.2 × 38.1 mm
- 2 layers34.8 × 67.3 mm
CheapMesh
joyel24/CheapMesh
PCB for Heltec HT-CT62: ESP32-C3 + SX1262 lora cheap module. Useful to run MeshTastic. Forked from : https://gitlab.com/paulhausk/CheapMesh
25 parts25 - 4 layers70.2 × 70.1 mm
Wireless Communication Board (WCB)V2.4
greghulette/Wireless_Communication_Board-WCB
Repository for the Wireless Commuincation Board (WCB)
65 parts16GPL-3.0