Skip to the content
2 layers65 × 44 mmDC DC Boost Converter, the printed circuit board in 3D

A custom DC-DC boost converter designed in KiCad using the LM2577-ADJ switching regulator.

Size
65 × 44 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
7
Pads
25
Tracks, vias
73, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Aug 2026
Updated
9 Aug 2026

Overview

DC DC Boost Converter is an open-source printed circuit board by chnChris-229, from the chnChris-229/DC-DC-Boost-Converter repository on GitHub. It is a 2-layer board of 65 × 44 mm with 11 parts on 7 nets, routed with 73 tracks and 0 vias.

It is built around the LM2577T-ADJ. Its parts include 3 capacitors, 3 resistors, 2 connectors, 1 IC and 1 diode. It belongs with the power boards of this library.

Main components

1

README

README.md

LM2577 DC-DC Boost Converter

A custom DC-DC boost converter designed in KiCad using the LM2577-ADJ switching regulator.

The circuit is designed to step a 9 V input up to approximately 20 V output. This project covers the full PCB design process, including schematic capture, component selection, PCB layout, routing, copper pours, design-rule checking, and Gerber/drill file generation.

Features

  • 9 V input
  • Approximately 20 V output
  • LM2577-ADJ switching regulator
  • 180 µH inductor
  • Schottky diode
  • Input and output filtering capacitors
  • Feedback resistor network
  • Two-layer PCB
  • Ground copper pour
  • Through-hole component layout
  • Gerber and Excellon drill files generated
  • PCB Design Rule Check completed

Parts

11
QtyValueFootprintReferences
1180uHInductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07PL1
11N5817Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
120VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
125uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
130.51kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1330nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
1470uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
19VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1LM2577T-ADJPackage_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_VerticalU1

Similar boards

  • 2 layers90.2 × 44.4 mmEnergieplatine, the printed circuit board in 3D

    Energieplatine

    entwickler-brandenburg/Tutorprojekt_Energieplatine

    41 parts
  • 2 layers46.2 × 31 mmBoard v09, the printed circuit board in 3D

    Board v09

    nelsonyamamoto/uC-CDI

    High-voltage power and trigger stage for a microcontroller-controlled capacitor discharge ignition (CDI) system, intended for small engines.

    37 parts
  • 2 layers60 × 30 mmController, the printed circuit board in 3D

    Controller

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    11 parts3kApache-2.0
  • 2 layers103 × 30.5 mmTS Front Endcap, the printed circuit board in 3D

    TS Front Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    11 parts1.3kMIT
  • 2 layers26 × 30 mmExpansion Card, the printed circuit board in 3D

    Expansion Card

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    11 parts1.1kCC-BY-4.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    11 parts1kGPL-3.0
  • 2 layers10 × 20 mm2 connector Sensor Board, the printed circuit board in 3D

    2 connector Sensor Board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    11 parts915
  • 2 layersFet module, the printed circuit board in 3D

    Fet module

    ByteWelder/Decktility

    A handheld PC

    11 parts855CC-BY-SA-4.0

Questions

How big is the DC DC Boost Converter PCB?

It measures 65 × 44 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DC DC Boost Converter use?

11 parts, built around the LM2577T-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DC DC Boost Converter KiCad files?

From the chnChris-229/DC-DC-Boost-Converter repository on GitHub, at the commit this page was made from: the board is DC-DC boost converter.kicad_pcb and its schematic DC-DC boost converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DC DC Boost Converter design in my own project?

Its repository states no licence, so its author keeps all rights: ask chnChris-229 before reusing the design.