2 layers63.5 × 58 mm
Latest
minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.
39 parts52GPL-3.0
2 layers284.7 × 94.2 mm
Ice60
chillKB/ice60v1460% Soldered Keyboard PCB w/ JST Powered by RP2040
- Size
- 284.7 × 94.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 202
- Nets
- 121
- Pads
- 772
- Tracks, vias
- 923, 49
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Dec 2022
- Updated
- 29 Sep 2023
Overview
Ice60 is an open-source printed circuit board by chillKB, from the chillKB/ice60v1 repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 284.7 × 94.2 mm with 202 parts on 121 nets, routed with 923 tracks and 49 vias.
It is built around the RP2040, W25Q128JVSIQ and SRV05-4. Its parts include 87 switches, 68 diodes, 17 capacitors, 6 resistors and 4 ICs. It belongs with the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
Parts
202| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +50 |
| 64 | MX_SW_solder | marbastlib-mx:SW_MX_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24 +48 |
| 13 | MX_SW_solder | marbastlib-mx:SW_MX_1.25u | SW47, SW63, SW65, SW67, SW68, SW70, SW74, SW78, SW79, SW81, SW82, SW84, SW85 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C7, C8, C11, C12, C13, C14, C15, C16, C17 |
| 6 | MX_SW_solder | marbastlib-mx:SW_MX_1.5u | SW16, SW29, SW64, SW69, SW80, SW86 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6, C10 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | JST SH 4-pin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J2 |
| 2 | MX_SW_solder | marbastlib-mx:SW_MX_1.75u | SW32, SW60 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | LED | marbastlib-mx:LED_MX_3mm-FLIPPED | D68 |
| 1 | LED | marbastlib-mx:LED_MX_3mm | D67 |
| 1 | LOGO | custom_parts:vial_logo | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | custom_parts:qmk | G*** |
| 1 | MX_SW_solder | marbastlib-mx:SW_MX_1.75u_stp | SW31 |
| 1 | RP2040 | Sleep-Lib:RP2040-QFN-56 | U1 |
| 1 | SRV05-4 | marbastlib-various:SOT-23-6-routable | U4 |
| 1 | SWD | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW0 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23 | U3 |
The 190 most common of 202 parts.
Questions
How big is the Ice60 PCB?
It measures 284.7 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ice60 use?
202 parts, built around the RP2040, W25Q128JVSIQ and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ice60 KiCad files?
From the chillKB/ice60v1 repository on GitHub, at the commit this page was made from: the board is ice60.kicad_pcb and its schematic ice60.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ice60 design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers224.4 × 97.8 mm
Knobdeavour
ScatteredDrifter/Buran-Ortho
A 39-key orthogonal keyboard with support for two knobs, based on a rp2040
105 parts46 - 2 layers253.3 × 113.3 mm
- 2 layers344.7 × 123.6 mm
- 2 layers346.1 × 118.3 mm
- 2 layers236.9 × 86.8 mm
- 2 layers346.1 × 93.7 mm
Sifrl main pcb
ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.
177 parts15 - 2 layers309.6 × 76.2 mm
Q9-Chimera
xommmmmmmm/QueueNineChimera
A drop-in, multi-layout (ortho/row/alpha stagger) PCB with numpad for Keychron Q9
201 parts15