Skip to the content
2 layers81.8 × 74.4 mmAgnostic box PCB, the printed circuit board in 3D

This repo contains all the materials needed to build an Agnostic Box

Size
81.8 × 74.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
46
Pads
98
Tracks, vias
352, 13
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Feb 2024
Updated
22 May 2026

Overview

Agnostic box PCB is an open-source printed circuit board by chihauccisoilconte, from the chihauccisoilconte/agnosticbox repository on GitHub. It is a 2-layer board of 81.8 × 74.4 mm with 33 parts on 46 nets, routed with 352 tracks and 13 vias.

Its parts include 6 resistors, 3 diodes, 3 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

agnostic box PCB/README.md

Agnostic Box PCB

This folder contains the PCB files for the Agnostic Box.

The PCB was made with KiCad, an open source electronics design suite. The folder includes KiCad project files, schematic and PCB layout files, Gerber files, drill files, board backups, graphics, footprints, and PCB export files.

Use the KiCad project files to inspect or modify the schematic and PCB layout. Use the Gerber and drill files when ordering or manufacturing the PCB.

For travel and safety, the standard Agnostic Box build does not include a battery. The PCB still includes the possibility of adding one through the battery footprint/connection, so builders can adapt the power setup if their use case requires it.

License

MIT License

Copyright (c) 2026 chihauccisoilconte

Permission is hereby granted, free of charge, to any person obtaining a copy of this repository and associated documentation files (the "Work"), to deal in the Work without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Work, and to permit persons to whom the Work is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Work.

THE WORK IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE WORK OR THE USE OR OTHER DEALINGS IN THE WORK.

Parts

33
QtyValueFootprintReferences
11, , , , , , , , , ,
6RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1-220, R2-220, R3-220, R4-10k, R5-10k, R6-10k
3LEDLED_THT:LED_D5.0mmLED1(D4), LED2(D5), LED3(D6)
3MountingHole_3.2mm_M3_DIN965MountingHole:MountingHole_3.2mm_M3_DIN965-, -, -
3R_PotentiometerPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV1(A1), RV2(A2), RV3(A3)
3SW_DIP_x01Button_Switch_THT:SW_PUSH_6mmSW1(D10), SW2(D11), SW3(D12)
1Arduino_Nano_v3.xModule:Arduino_NanoArduino Nano (or Nano esp32)
1BatteryConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Verticalbattery
1GY-521gy521:GY-521U1
1PAM8302AConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalPAM8302A

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Agnostic box PCB PCB?

It measures 81.8 × 74.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Agnostic box PCB use?

33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Agnostic box PCB KiCad files?

From the chihauccisoilconte/agnosticbox repository on GitHub, at the commit this page was made from: the board is agnostic box PCB/agnostic box PCB.kicad_pcb and its schematic agnostic box PCB/agnostic box PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Agnostic box PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask chihauccisoilconte before reusing the design.