Skip to the content
2 layers14 × 49.5 mmAdaptor, the printed circuit board in 3D

200MHz USB 3.1 logic analyzer and 20MHz ADC w/ pulseview

Size
14 × 49.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
21
Pads
96
Tracks, vias
257, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
30 May 2026
Updated
5 Aug 2026

Overview

Adaptor is an open-source printed circuit board by cheyao, from the cheyao/ch32-logic-analyzer repository on GitHub. It is a 2-layer board of 14 × 49.5 mm with 4 parts on 21 nets, routed with 257 tracks and 0 vias.

It belongs with the sensors and measurement boards of this library.

README

README.md

200Msps 16ch logic analyzer + 20Msps oscilloscope

This is a cheap 200Msps logic analyzer with a 20Msps analog component. It uses USB 3.2 to send data to the computer, and can also act as a ch32h417 development board.

It is usable with pulseview delivering a beautiful interface and allowing you to view all kinds of diffrent protocols. And with voltage changing, it supports 1.2V, 3.3V and 5V opration modes.

The analog channels support 20Msps at 10bit accuracy, or 5MHz at 12bit accuracy. Input range is from 0V to 5V, and it supports external triggering too!

The bottom row of header breaks out GPIO pins of various protocols, allowing the board to also become a devboard that can be programed via USB.


The PCB is a 4-layered board in order to preserve signal intergity on the USB 3.2 data lines. With high-quality TI active components to preserve signal quality.

Parts

4
QtyValueFootprintReferences
1Conn_02x04_Odd_Evenadaptor:Edge_1.27mm_02x04J1
1Conn_02x04_Odd_Evenadaptor:Edge_2.54mm_02x04J4
1Conn_02x20adaptor:Edge_1.27mm_02x20J2
1Conn_02x20adaptor:Edge_2.54mm_02x20J3

More from cheyao/ch32-logic-analyzer

1
  • 4 layers45.2 × 40.4 mmLogic analyzer, the printed circuit board in 3D

    Logic analyzer

    cheyao/ch32-logic-analyzer

    200MHz USB 3.1 logic analyzer and 20MHz ADC w/ pulseview

    100 parts4

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the Adaptor PCB?

It measures 14 × 49.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adaptor use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adaptor KiCad files?

From the cheyao/ch32-logic-analyzer repository on GitHub, at the commit this page was made from: the board is adaptor/adaptor.kicad_pcb and its schematic adaptor/adaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adaptor design in my own project?

Its repository states no licence, so its author keeps all rights: ask cheyao before reusing the design.