
Flashover
Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product

GreywireStudio - a combined software/hardware product
Flashover Controls is an open-source printed circuit board by Cherry-Blossom-Development, from the Cherry-Blossom-Development/GreywireStudio repository on GitHub. It is a 4-layer board of 84 × 58 mm with 68 parts on 55 nets, routed with 618 tracks and 108 vias.
It is built around the PEC11R-4220F-S0024. Its parts include 37 diodes, 15 resistors, 8 capacitors, 4 switches and 1 IC. It belongs with the audio and music boards of this library.
GreywireStudio is a line of guitar effects pedals from Cherry Blossom Development. The first series, Linework, is a set of pedals that work on their own or together under a phone-connected control pedal. See General Concept.docx for the overall product concept. Linework Control Specification.docx defines the rules every Linework pedal follows: the MIDI loop connecting them to Switchyard, the shared message map, presets and firmware updates.
All tools are free:
| Tool | Purpose |
|---|---|
| KiCad | Schematic capture and PCB layout |
| LTspice | Circuit simulation (gain, clipping, tone response) |
libraries/
GreywireStudio.kicad_sym # Shared KiCad symbols (e.g. 3PDT footswitch)
pedals/
<pedal-name>/
README.md # Design notes, parts list, status
*Product Document.docx # Product definition
kicad/ # KiCad project (schematic + PCB)
sim/ # LTspice simulations (.asc)| Pedal | Name | Type | Status |
|---|---|---|---|
| Distortion | Flashover | Distortion / overdrive | Design |
| Controller | Switchyard | Control pedal (phone-connected) | Concept |
| Controller with audio | Switchyard Audio | Control pedal plus digital effects | Planning |
| Boost | Tap Changer | Clean boost | Design |
| Phaser | Three Phase | Analog phaser | Idea |
| Tremolo | Rolling Blackout | Analog (optical) tremolo | Idea |
| Chorus | Double Circuit | Analog (bucket brigade) chorus / vibrato | Idea |
Product names are working names pending a trademark search (see IP_RESEARCH.md).
The public website is https://greywirestudio.com, kept in the GreywireStudio-Website repository.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | LED | LED_SMD:LED_0805_2012Metric | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +17 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R23, R24, R25, R26, R27, R28, R29, R30, R31, R32 |
| 6 | 10n | Capacitor_SMD:C_0805_2012Metric | C33, C34, C35, C36, C37, C38 |
| 3 | LED | LED_THT:LED_D3.0mm | D40, D41, D42 |
| 3 | PEC11R-4220F-S0024 | GreywireStudio:RotaryEncoder_Bourns_PEC11R-4xxxF-Sxxxx_Vertical | SW1, SW2, SW3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R35, R36 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3 | H3, H4 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C40 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C39 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R46 |
| 1 | IS31FL3236A | Package_QFP:TQFP-48-1EP_7x7mm_P0.5mm_EP4.11x4.11mm | U10 |
| 1 | Link | LED_THT:LED_D3.0mm | D45 |
| 1 | Soft/Hard | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW4 |
| 1 | To main board | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J8 |

Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product

Cherry-Blossom-Development/GreywireStudio
GreywireStudio - a combined software/hardware product



mnemocron/Nucleo-DSP-Shield
Audio DSP Shield for STM32 Nucleo-144 Boards (H723zg) based on the TLV320 CODEC

axooexe/Macropad-s-PCB
This repository contains the schematics and PCB layout files for a custom 8switches and an encoder macropad.


Pegoku/Home-Assistant-Control-pad
This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).

varaddorle007/deck-8
Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware

Alberto0235/DRSSTC-Fiber-Optic-Interrupter
Custom 4-layer interrupter control board for DRSSTC systems. STM32F405-based, fiber-optically isolated outputs, hardware E-brake safety chain, and controlled-impedance routing (90Ω USB, 50Ω FSMC/SDIO).
It measures 84 × 58 mm and has 4 copper layers, 1.6 mm thick.
68 parts, built around the PEC11R-4220F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cherry-Blossom-Development/GreywireStudio repository on GitHub, at the commit this page was made from: the board is pedals/distortion/kicad/Flashover_Controls/Flashover_Controls.kicad_pcb and its schematic pedals/boost/kicad/TapChanger/TapChanger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Cherry-Blossom-Development before reusing the design.