Skip to the content
6 layers55.4 × 42.9 mmAity kids-4-LED board, the printed circuit board in 3D

Dieses Projekt bietet ein einfaches 4-LED-Board an, das mit einem Seeed Studio XIAO RP2040 (oder einem kompatiblen XIAO-Modul) betrieben wird.

Size
55.4 × 42.9 mm
Copper layers
6
Thickness
1.6 mm
Parts
14
Nets
14
Pads
50
Tracks, vias
82, 12
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Mar 2026
Updated
24 Oct 2026

Overview

Aity kids-4-LED board is an open-source printed circuit board by chatelao, from the chatelao/aityRP2040_LED-PCB-und-Software repository on GitHub. It is a 6-layer board of 55.4 × 42.9 mm with 14 parts on 14 nets, routed with 82 tracks and 12 vias.

Its parts include 7 connectors and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.

README

README.md

Aity Kids 4-LED Board

Dieses Projekt bietet ein einfaches 4-LED-Board an, das mit einem Seeed Studio XIAO RP2040 (oder einem kompatiblen XIAO-Modul) betrieben wird. Es enthält Beispiele sowohl für CircuitPython als auch für den Microsoft MakeCode Maker.

Hardware-Konfiguration

  • Mikrocontroller: Seeed Studio XIAO RP2040.
  • NeoPixel-Datenpin: Verbunden mit D10 (entspricht GP3 auf dem RP2040).
  • LED-Matrix: In den bereitgestellten Beispielen für eine 16x16-Matrix (256 LEDs) konfiguriert.
image

Lektionen

  1. Lektion 1: Erste Schritte
  2. Lektion 2: Arcade Controller
  3. Lektion 5: Halloween Matrix Engine & Animationen

Vorbereitung des XIAO RP2040

Um eine neue Firmware (CircuitPython oder MakeCode) auf den XIAO RP2040 zu laden, müssen Sie zuerst in den Bootloader-Modus wechseln:

  1. Verbinden Sie den XIAO RP2040 über USB mit Ihrem Computer.
  2. Drücken und halten Sie die BOOT-Taste (beschriftet mit 'B').
  3. Während Sie die BOOT-Taste gedrückt halten, drücken Sie einmal kurz die RESET-Taste (beschriftet mit 'R') oder stecken Sie das USB-Kabel ein.
  4. Lassen Sie die BOOT-Taste los.
  5. Ein neues Laufwerk mit dem Namen RPI-RP2 sollte auf Ihrem Computer erscheinen.

CircuitPython (CPy) Installation

1. CircuitPython-Firmware installieren

  1. Laden Sie die neueste CircuitPython-UF2-Datei für den Seeeduino XIAO RP2040 von circuitpython.org herunter.
  2. Wechseln Sie in den Bootloader-Modus (siehe oben), damit das Laufwerk RPI-RP2 erscheint.
  3. Ziehen Sie die heruntergeladene UF2-Datei per Drag-and-Drop auf das Laufwerk RPI-RP2.
  4. Das Board startet neu und ein neues Laufwerk mit dem Namen CIRCUITPY erscheint.

2. Bibliotheken installieren

CircuitPython benötigt externe Bibliotheken, um das Beispiel auszuführen.

  1. Laden Sie das CircuitPython Library Bundle herunter.
  2. Erstellen Sie einen Ordner namens lib auf Ihrem CIRCUITPY-Laufwerk, falls dieser noch nicht existiert.
  3. Kopieren Sie die folgenden Ordner/Dateien aus dem Bundle in den lib-Ordner:
    • adafruit_neopixel.mpy (oder den Ordner)
    • adafruit_imageload (Ordner)
    • adafruit_display_text (falls für zukünftige Erweiterungen benötigt)

3. Code bereitstellen

  1. Kopieren Sie die Datei code.py aus dem Stammverzeichnis dieses Repositories auf das CIRCUITPY-Laufwerk.
  2. Falls der Code ein Bild benötigt, kopieren Sie image.png in das Stammverzeichnis des CIRCUITPY-Laufwerks.
  3. Das Board lädt den Code automatisch neu und beginnt mit der Ausführung des Skripts.

MakeCode-Installation

Der Microsoft MakeCode Maker bietet einen blockbasierten Editor sowie einen TypeScript-Editor für den RP2040.

1. Projekt öffnen

  1. Gehen Sie auf Microsoft MakeCode Maker.
  2. Klicken Sie auf Import und wählen Sie dann Import File... aus.
  3. Wählen Sie die Datei makecode/pxt.json oder makecode/main.ts aus diesem Repository aus.
  4. Wenn Sie dazu aufgefordert werden, wählen Sie Seeed Studio XIAO RP2040 als Ihr Board aus.

2. Herunterladen und Flashen

  1. Klicken Sie auf die Schaltfläche Download im MakeCode-Editor.
  2. Es wird eine .uf2-Datei generiert.
  3. Wechseln Sie in den Bootloader-Modus (siehe oben) auf Ihrem XIAO RP2040.
  4. Ziehen Sie die heruntergeladene UF2-Datei per Drag-and-Drop auf das Laufwerk RPI-RP2.
  5. Das Board startet neu und beginnt sofort mit der Ausführung Ihres MakeCode-Programms.

Parts

14
QtyValueFootprintReferences
6Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ102, J103, J104, J105, J106, J107
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965H101, H102, H103, H104
2TestPoint_SmallTestPoint:TestPoint_Pad_1.5x1.5mmTP101, TP102
1Conn_01x03Connector_Wire:SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm_ReliefJ101
1MOUDLE-SEEEDUINO-XIAO-ESP32C3xDuinoRail:XIAO_SMDU101

Similar boards

  • 6 layers45 × 45 mmPQ MagYBoard, the printed circuit board in 3D

    PQ MagYBoard

    nanosatlab/pocat-hw

    IEEE PocketQubes

    14 parts12
  • 6 layers48.4 × 48.4 mmSolarCellX v1, the printed circuit board in 3D

    SolarCellX v1

    spacecraft-design-lab-2019/Solar-Panel-X

    14 parts
  • 6 layersKibom test marked, the printed circuit board in 3D

    Kibom test marked

    zumizumi0625/PCB_Auto_test

    PCB設計の自動テスト CI/CD パイプライン(KiBot + ngspice + GitHub Actions)

    14 parts
  • 6 layers22.4 × 58.2 mmTc2-sim usb pcb, the printed circuit board in 3D

    Tc2-sim usb pcb

    TheCacophonyProject/thermal-camera-v2

    tc2-panel.py uses KiKit to build the manufacturing panel from the individual board files.

    13 partsCERN-OHL-W-2.0
  • 6 layers51 × 46 mmKiCad Stator, the printed circuit board in 3D

    KiCad Stator

    janrenegradwohl/PCB_AxialMotor

    Universial Motor

    13 partsMIT
  • 6 layers26 × 42.5 mmStdc14-to arm10+8pin, the printed circuit board in 3D

    Stdc14-to arm10+8pin

    edwa-rd/swd-converter

    STDC14 / MIPI10 / ARM10 / 4x2pin conversion board(s)

    13 partsGPL-3.0
  • 6 layers34 × 60 mmBoard d, the printed circuit board in 3D

    Board d

    Alfredapp-hash/Guardian_One

    Nets listed on the optional .kicadpcb shell match this table.

    13 parts
  • 6 layers44 × 50.8 mmGtb-6layer, the printed circuit board in 3D

    Gtb-6layer

    pdp7/gtb

    Getting to Blinky for Open Hardware Summit 2020

    13 parts3Apache-2.0

Questions

How big is the Aity kids-4-LED board PCB?

It measures 55.4 × 42.9 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Aity kids-4-LED board use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aity kids-4-LED board KiCad files?

From the chatelao/aityRP2040_LED-PCB-und-Software repository on GitHub, at the commit this page was made from: the board is kicad/aity-kids-4-LED-board.kicad_pcb and its schematic kicad/aity-kids-4-LED-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aity kids-4-LED board design in my own project?

Its repository states no licence, so its author keeps all rights: ask chatelao before reusing the design.