
Chastity device rev1
chastetiddy/chastity_device
Chastity Device: Modification of jfedor's Flatbox R3

Chastity Device: Modification of jfedor's Flatbox R3
Chastity device rev2 is an open-source printed circuit board by chastetiddy, from the chastetiddy/chastity_device repository on GitHub. It is a 2-layer board of 230 × 120 mm with 29 parts on 43 nets, routed with 177 tracks and 25 vias.
Its parts include 20 switches and 2 resistors.
Chastity Device: Modification of jfedor's Flatbox R3
This is a modification of jfedor's flatbox rev3.
I've made some minor rearrangements to the traces and button placement, as well as changing the tact switches to SMD parts. The board itself is a rounded rectangle as well, so as to use a stacked acrylic case.
To fully assemble you will need:
You will need 1 each of acrylic panels 1-4. They must be the following thicknesses:
More detailed documentation forthcoming.
PCB design licensed under CC BY-SA 4.0.
PCB design uses the following libraries:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW_Push | Kailh:Kailh_Low_Profile_Socket | SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 |
| 6 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | Brook_PS3PS4_PCBA | Brook:Brook_PS3PS4_PCBA | A1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | SW_LOCKOUT | Button_Switch_SMD:SW_SPDT_PCM12 | SW19 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW20 |
The 24 most common of 29 parts.

chastetiddy/chastity_device
Chastity Device: Modification of jfedor's Flatbox R3

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 230 × 120 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the chastetiddy/chastity_device repository on GitHub, at the commit this page was made from: the board is rev2/chastity-device-rev2.kicad_pcb and its schematic rev1/kicad/chastity-device-rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask chastetiddy before reusing the design.