
Sc64v2
Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart

Simple demo board of FUSB302 with STM32G030. USB-C PD negotiation.
PD boi is an open-source printed circuit board by charliegilliland, from the charliegilliland/PD_boi repository on GitHub. It is a 4-layer board of 16.5 × 48.8 mm with 22 parts on 40 nets, routed with 185 tracks and 81 vias.
It is built around the STM32G030F6P6, FUSB302BVMPX and 10137061-00021LF. Its parts include 13 capacitors, 4 connectors, 3 ICs, 1 resistor and 1 diode. It belongs with the STM32 boards of this library.
This is a simple demo of the FUSB302 with STM32G030. The device can negotiate an output voltage with a USB-C PD source.
The firmware is based on the PD_micro code, with the approproate changes to support the STM32.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5, C8, C9, C10 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C4, C6 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3, J4 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C11 |
| 1 | 10137061-00021LF | 10137061-00021LF:AMPHENOL_10137061-00021LF | J1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | Conn_01x02_Female | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | FUSB302BVMPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | STM32G030F6 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |

Polprzewodnikowy/SummerCart64
SummerCart64 - a fully open source N64 flashcart

Jana-Marie/philphoc-luma
Zigbee/Hue to WS2812 or similar addressable LED bridge.

Epicjoy/SC64
This project's hardware and casing are modified based on the SummerCart64 project.

maribu/business-card
A PCB based business card using open hardware and free software

kevinlutzer/business-card
Showcase project I made to give to potential employers.


It measures 16.5 × 48.8 mm and has 4 copper layers, 1.61 mm thick.
22 parts, built around the STM32G030F6P6, FUSB302BVMPX and 10137061-00021LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the charliegilliland/PD_boi repository on GitHub, at the commit this page was made from: the board is PD_boi.kicad_pcb and its schematic PD_boi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask charliegilliland before reusing the design.