Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
TinyMod5 is an open-source printed circuit board by CharleyShattuck, from the CharleyShattuck/Stenomod-Hardware repository on GitHub. It is a 2-layer board of 201.2 × 75.7 mm with 42 parts on 39 nets, routed with 275 tracks and 18 vias.
It is built around the MCP23017-E/SS. Its parts include 25 switches, 5 connectors, 2 resistors and 1 IC.
TinyMod4 is the current keyboard. TinyModsplit is a prototype split version of TinyMod.
formerly: In addition to the left hand module for stenomod15, the one with the split S- into two keys, we now have the three boards currently being used in stenomods. Stenomod16 is the new hinge model. Tiny-stenomod is the new TinyMod model.
KiCad footprints used here were found at https://github.com/ruiqimao/keyboard-pcb-guide
License for Gateron.pretty is not known as it was modified from the file "CHERRY_PCB_100H.kicad_mod", obtained at https://github.com/stormbard/Keyboard.pretty which had no expressed license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | KEYSW | Buttons_Switches_Keyboard:SW_Cherry_MX1A_1.00u_PCB | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +9 |
| 2 | Conn_01x09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J1, J2 |
| 2 | R | Resistors_ThroughHole:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R2 |
| 1 | MCP23017 | Housings_DIP:DIP-28_W7.62mm_Socket_LongPads | U1 |
| 1 | Slider Switch | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | Slider Switch 2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | Slider Switch 3 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
The 33 most common of 42 parts.
It measures 201.2 × 75.7 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CharleyShattuck/Stenomod-Hardware repository on GitHub, at the commit this page was made from: the board is TinyMod/TinyMod5/TinyMod5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CharleyShattuck before reusing the design.
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
CharleyShattuck/Stenomod-Hardware
Open Source hardware files for Stenomod 16 hinge and TinyMods 1, 2, 3, and 4. (same firmware for StenoMod hinge and TinyMod 1, but new firmware for TinyMod 2 and new again for TinyMod 3, and then again for TinyMod4)
mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
ktec-hq/ErgoDone
ErgoDox using pro micro. Original work by Dox. Brainhole association present
djbristow/RAILS
RAILS is a software model and implementation of an automated system to assist the model railroader achieve realism in the operation of a model railroad. The model then drives the development of software.
