Skip to the content
2 layers73.7 × 50.9 mmAAA Battery Board, the printed circuit board in 3D

Remote RTC/NVRAM battery for retro computers.

Size
73.7 × 50.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
6
Pads
16
Tracks, vias
19, 1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
26 Oct 2023
Updated
17 Mar 2025

Overview

AAA Battery Board is an open-source printed circuit board by chadr, from the chadr/AAA-Remote-Battery-Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 73.7 × 50.9 mm with 7 parts on 6 nets, routed with 19 tracks and 1 via.

Its parts include 1 diode, 1 connector and 1 fuse. It belongs with the power boards of this library.

README

README.md

AAA Remote Battery Board - Updated!

Remote RTC/CMOS/NVRAM battery for retro computer motherboards. Provides about +4.5V. Which is what most vintage motherboards require. +3V, like from a CR2032, is not appropriate!

Features:

  • Higher voltage than CR2032 and higher capacity for longer life
  • Diode to prevent reverse charging
  • Diode delete solder jumper - NEW
  • Universal fuse holder footprint accepts wide and narrow spacing - NEW
  • 100ma fuse to protect motherboard if a short develops
  • Nylon fuse holder contains fuse blast and glass
  • Uses 1x4 pin headers found on most motherboards for simple cabling
  • PCB cutouts for Cable tie to secure batteries in rough service situations
  • Backer board to raise battery off case when using tape/velcro - NEW
  • Mounting holes for M3 standoffs
  • No motherboard modifications required!
AAA Battery Board Assembled AAA Backer Board AAA Battery Board Open Circuit Voltage

Here's a scan from a 386sx AT motherboard. Notice the voltages it requires. It warns against using +3V batteries like a CR2032!

Manual Scan

Bill of Materials

ItemQtyMFG Part NumMouser Part Num
Keystone 3xAAA Holder12479534-2479
1N4148 Diode11N4148-T50R512-1N4148T50R
1x4 2.54mm Male Header1826926-4571-826926-4
Fuse1BK1/GMC-100-R504-BK1-GMC-100-R
Fuse Holder10PTF0078P576-0PTF0078P
Fuse Clip100BS0232P576-00BS0232P

Board Information

Dimensions:
Layers: 2
Finish: HASL
Make sure to choose "custom position" for order number /w JLCPCB or PCBWAY.

Purchasing

I sell assembled kits complete with cables, mounting hardware, and batteries in my eBay store.
And on Tindie (Cheaper on Tindie due to lower fees!) Link

I sell on Tindie

Parts

7
QtyValueFootprintReferences
1100mAPCRestoLib:UniversalGreenFuseHolderF1
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
13x AAA2479:BAT_2479BT1
1Diode DeleteJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1KiCad-Logo2_6mm_SilkScreenSymbol:KiCad-Logo2_6mm_SilkScreenKiCad Logo
1OSHW-Logo2_9.8x8mm_SilkScreenSymbol:OSHW-Logo2_9.8x8mm_SilkScreenOpen Hardware Logo
1To MoboConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the AAA Battery Board PCB?

It measures 73.7 × 50.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AAA Battery Board use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AAA Battery Board KiCad files?

From the chadr/AAA-Remote-Battery-Board repository on GitHub, at the commit this page was made from: the board is KiCad/AAA Battery Board/AAA Battery Board.kicad_pcb and its schematic KiCad/AAA Battery Board/AAA Battery Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AAA Battery Board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).