Skip to the content
2 layers60 × 60 mmConfigurable adaptor, the printed circuit board in 3D

Configurable adaptor

Cerybra/physarum-biocomputer

The official repository of the Cerybra Biocomputer.

Size
60 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
40
Pads
64
Tracks, vias
61, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
20 May 2026
Updated
7 Aug 2026

Overview

Configurable adaptor is an open-source printed circuit board by Cerybra, from the Cerybra/physarum-biocomputer repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 60 × 60 mm with 20 parts on 40 nets, routed with 61 tracks and 0 vias.

README

README.md

Physarum Biocomputer



Project Structure

Descriptions

The project structure is organized as follows:

  • 📂 adaptors: contains all of the hardware files for the various adaptors that are compatible with the biocomputer carrier board.

  • 📂 data: contains all of the experimentally collected data.

  • 📂 devices: contains all of the hardware files for both the open-air and enclosure-type devices.

  • 📂 modules: contains all of the hardware files for each of the biocomputer modules.

  • 📂 software: contains all of the software used in performing experiments.

  • 📂 simulations: contains all of the code used in performing equivalent circuit simulations.

  • 📂 plots: contains all of the code used in producing the main figures.

Structure

📂 repository

  • 📂 data
    • 📂 device-pulse-recordings
    • 📂 device-regression-recordings
    • 📂 device-sweep-recordings
    • 📂 eis-recordings
    • 📂 noise-recordings
    • 📂 reservoir-computing-recordings
  • 📂 modules
    • 📂 biocomputer-eval-motherboard
    • 📂 dac-eval-module
    • 📂 daq-eval-board
    • 📂 dual-rail-power-eval-module
    • 📂 selector-eval-module
  • 📂 adaptors
    • 📂 1x1-adaptor
    • 📂 4x1-adaptor
    • 📂 8x1-adaptor
    • 📂 card-half
    • 📂 card-full
    • 📂 configurable-adaptor
    • 📂 standard-adaptor
  • 📂 software
    • 📂 examples
  • 📂 devices
    • 📂 enclosures
    • 📂 pluggable
  • 📂 simulations
  • 📂 plots

Reproducibility

To reproduce all of the main figures, either clone the repository or download the data directory. Then, run each of the scripts within the plots/main directory.

Parts

20
QtyValueFootprintReferences
16Conn_01x02_SocketConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ101, J102, J103, J104, J201, J202, J203, J204, J301, J302, J303, J304, J401, J402, J403, J404
4Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J2, J3, J4

More from Cerybra/physarum-biocomputer

12
  • 6 layers165 × 100 mmDaq eval board, the printed circuit board in 3D

    Daq eval board

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    240 partsAGPL-3.0
  • 4 layers400 × 200 mmBiocomputer eval motherboard, the printed circuit board in 3D

    Biocomputer eval motherboard

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    143 partsAGPL-3.0
  • 4 layers65 × 100 mmDual rail power eval module, the printed circuit board in 3D

    Dual rail power eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    102 partsAGPL-3.0
  • 4 layers50 × 50 mmSelector eval module, the printed circuit board in 3D

    Selector eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    32 partsAGPL-3.0
  • 6 layers50 × 50 mmDac eval board, the printed circuit board in 3D

    Dac eval board

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    30 partsAGPL-3.0
  • 6 layers128.8 × 60 mmCard full, the printed circuit board in 3D

    Card full

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    25 partsAGPL-3.0
  • 2 layers80 × 60 mmCard half, the printed circuit board in 3D

    Card half

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    16 partsAGPL-3.0
  • 2 layers60 × 60 mm8x1-adaptor, the printed circuit board in 3D

    8x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    12 partsAGPL-3.0
  • 2 layers60 × 60 mm4x1-adaptor, the printed circuit board in 3D

    4x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    8 partsAGPL-3.0
  • 2 layers60 × 60 mm1x1-adaptor, the printed circuit board in 3D

    1x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    5 partsAGPL-3.0
  • 2 layersReceptacle insert, the printed circuit board in 3D

    Receptacle insert

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0
  • 2 layers15 × 10 mmPluggable resistor, the printed circuit board in 3D

    Pluggable resistor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Configurable adaptor PCB?

It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Configurable adaptor use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Configurable adaptor KiCad files?

From the Cerybra/physarum-biocomputer repository on GitHub, at the commit this page was made from: the board is adaptors/configurable-adaptor/configurable-adaptor.kicad_pcb and its schematic adaptors/1x1-adaptor/1x1-adaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Configurable adaptor design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).