Skip to the content
2 layers80 × 60 mmCard half, the printed circuit board in 3D

The official repository of the Cerybra Biocomputer.

Size
80 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
25
Pads
74
Tracks, vias
51, 0
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 May 2026
Updated
7 Aug 2026

Overview

Card half is an open-source printed circuit board by Cerybra, from the Cerybra/physarum-biocomputer repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 80 × 60 mm with 16 parts on 25 nets, routed with 51 tracks and 0 vias.

README

README.md

Physarum Biocomputer



Project Structure

Descriptions

The project structure is organized as follows:

  • 📂 adaptors: contains all of the hardware files for the various adaptors that are compatible with the biocomputer carrier board.

  • 📂 data: contains all of the experimentally collected data.

  • 📂 devices: contains all of the hardware files for both the open-air and enclosure-type devices.

  • 📂 modules: contains all of the hardware files for each of the biocomputer modules.

  • 📂 software: contains all of the software used in performing experiments.

  • 📂 simulations: contains all of the code used in performing equivalent circuit simulations.

  • 📂 plots: contains all of the code used in producing the main figures.

Structure

📂 repository

  • 📂 data
    • 📂 device-pulse-recordings
    • 📂 device-regression-recordings
    • 📂 device-sweep-recordings
    • 📂 eis-recordings
    • 📂 noise-recordings
    • 📂 reservoir-computing-recordings
  • 📂 modules
    • 📂 biocomputer-eval-motherboard
    • 📂 dac-eval-module
    • 📂 daq-eval-board
    • 📂 dual-rail-power-eval-module
    • 📂 selector-eval-module
  • 📂 adaptors
    • 📂 1x1-adaptor
    • 📂 4x1-adaptor
    • 📂 8x1-adaptor
    • 📂 card-half
    • 📂 card-full
    • 📂 configurable-adaptor
    • 📂 standard-adaptor
  • 📂 software
    • 📂 examples
  • 📂 devices
    • 📂 enclosures
    • 📂 pluggable
  • 📂 simulations
  • 📂 plots

Reproducibility

To reproduce all of the main figures, either clone the repository or download the data directory. Then, run each of the scripts within the plots/main directory.

Parts

16
QtyValueFootprintReferences
8Conn_CoaxialNeuroPhy_Adaptor:1333801201J5, J6, J7, J8, J9, J10, J11, J12
3Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1, J2, J4
3LOGOLOGOG***, G***, G***
2Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132134-11_VerticalJ13, J14

More from Cerybra/physarum-biocomputer

12
  • 6 layers165 × 100 mmDaq eval board, the printed circuit board in 3D

    Daq eval board

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    240 partsAGPL-3.0
  • 4 layers400 × 200 mmBiocomputer eval motherboard, the printed circuit board in 3D

    Biocomputer eval motherboard

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    143 partsAGPL-3.0
  • 4 layers65 × 100 mmDual rail power eval module, the printed circuit board in 3D

    Dual rail power eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    102 partsAGPL-3.0
  • 4 layers50 × 50 mmSelector eval module, the printed circuit board in 3D

    Selector eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    32 partsAGPL-3.0
  • 6 layers50 × 50 mmDac eval board, the printed circuit board in 3D

    Dac eval board

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    30 partsAGPL-3.0
  • 6 layers128.8 × 60 mmCard full, the printed circuit board in 3D

    Card full

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    25 partsAGPL-3.0
  • 2 layers60 × 60 mmConfigurable adaptor, the printed circuit board in 3D

    Configurable adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    20 partsAGPL-3.0
  • 2 layers60 × 60 mm8x1-adaptor, the printed circuit board in 3D

    8x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    12 partsAGPL-3.0
  • 2 layers60 × 60 mm4x1-adaptor, the printed circuit board in 3D

    4x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    8 partsAGPL-3.0
  • 2 layers60 × 60 mm1x1-adaptor, the printed circuit board in 3D

    1x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    5 partsAGPL-3.0
  • 2 layersReceptacle insert, the printed circuit board in 3D

    Receptacle insert

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0
  • 2 layers15 × 10 mmPluggable resistor, the printed circuit board in 3D

    Pluggable resistor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0

Similar boards

  • 2 layers140.5 × 30 mmType e, the printed circuit board in 3D

    Type e

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    16 parts3kApache-2.0
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 2 layers122 × 37 mmV0-UmbilicalBoard, the printed circuit board in 3D

    V0-UmbilicalBoard

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    16 parts1.1kGPL-3.0
  • 2 layers152 × 57.6 mmVideoslotadapter, the printed circuit board in 3D

    Videoslotadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    16 parts1kGPL-3.0
  • 2 layers36 × 63.4 mmSmart ringfinal layout, the printed circuit board in 3D

    Smart ringfinal layout

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    16 parts915
  • 2 layers60 × 40 mmHASwitchPlate, the printed circuit board in 3D

    HASwitchPlate

    aderusha/HASwitchPlate

    LCD touchscreen for Home Automation

    16 parts738MIT
  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704

Questions

How big is the Card half PCB?

It measures 80 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Card half use?

16 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Card half KiCad files?

From the Cerybra/physarum-biocomputer repository on GitHub, at the commit this page was made from: the board is adaptors/card-half/card-half.kicad_pcb and its schematic adaptors/1x1-adaptor/1x1-adaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Card half design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).