
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

Material for the SAR ADC project in the iCEBreaker FPGA For IoT Sensing Systems FS2024 course.
Fpga sar is an open-source printed circuit board by CedricHirschi, from the CedricHirschi/fpga-sar repository on GitHub. It is a 2-layer board of 23 × 40 mm with 38 parts on 37 nets, routed with 178 tracks and 65 vias.
Its parts include 28 resistors, 5 capacitors, 3 connectors and 1 IC. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Material for the SAR ADC project in the iCEBreaker FPGA For IoT Sensing Systems FS2024 course.
Build a SAR ADC and a way to read its values.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 20k | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R6, R8, R10, R12, R14, R16, R18, R20, R22, R24, R28 |
| 13 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R5, R7, R9, R11, R13, R15, R17, R19, R21, R23, R25, R26 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 680 | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | ANALOG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP6072-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | PMOD2 | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | PMOD3 | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J2 |

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 23 × 40 mm and has 2 copper layers, 1.6 mm thick.
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CedricHirschi/fpga-sar repository on GitHub, at the commit this page was made from: the board is hardware/fpga_sar.kicad_pcb and its schematic hardware/fpga_sar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CedricHirschi before reusing the design.