cecilsmith/GPS-MINPOINTThis is the project folder for a Spring 2024 EE2361 Final Project.
GPS MINPOINT is an open-source printed circuit board by cecilsmith, from the cecilsmith/GPS-MINPOINT repository on GitHub. It is a 2-layer board of 64.8 × 74.9 mm with 20 parts on 31 nets, routed with 93 tracks and 0 vias.
It is built around the PIC24FJ64GA002-I/SP. Its parts include 5 capacitors, 4 connectors, 3 resistors, 2 diodes and 1 IC. It belongs with the radio and wireless boards and the PIC boards of this library.
This is the project folder for a Spring 2024 EE2361 Final Project.
gps.h/gps.c) to interface with GPS module via UARTuart.h/uart.c) to handle communication with GPS modulelcd.h/lcd.c) to handle communication with LCD modulecalculations.h/calculations.c) to find useful information from GPS coordinatesutils.h/utils.c) to contain non-standard, yet generally useful functionsmain.c to initialize hardware, call GPS driver to get location data, process data to find location| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C4, C5 |
| 2 | , | ||
| 2 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 110990030 | footprints:CONN_110990030_SEE | J1 |
| 1 | G_LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LCD | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | PIC24FJ64GA002-I/SP | footprints:SPDIP28_300MC_MCH | U2 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | ProgrammerConnector | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | R_LED | LED_THT:LED_D3.0mm | D2 |
The 17 most common of 20 parts.
It measures 64.8 × 74.9 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the PIC24FJ64GA002-I/SP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cecilsmith/GPS-MINPOINT repository on GitHub, at the commit this page was made from: the board is 3_Hardware/KiCad/GPS-MINPOINT.kicad_pcb and its schematic 3_Hardware/KiCad/GPS-MINPOINT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cecilsmith before reusing the design.
DonovanBrenny/Handheld_Gaming_Device
Custom built PIC24-based, handheld, programmable, game console with a 128x128 OLED, dual analog joysticks, and four built-in games (Pong, Ackanoid, 2.5D Maze raycaster, Dinosaur Runner). Firmware in C, hardware in KiCad.
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!