2 layers82 × 120 mm
Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467
2 layers21.8 × 33 mm
Arduinopromini
cdrfiuba/arion4Un robot seguidor de líneas basado en la categoría Micromouse.
- Size
- 21.8 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 28
- Pads
- 88
- Tracks, vias
- 315, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Oct 2015
- Updated
- 18 Mar 2017
Overview
Arduinopromini is an open-source printed circuit board by cdrfiuba, from the cdrfiuba/arion repository on GitHub. It is a 2-layer board of 21.8 × 33 mm with 15 parts on 28 nets, routed with 315 tracks and 7 vias.
It is built around the ATMEGA328-AU. Its parts include 7 capacitors, 2 resistors, 2 ICs, 1 diode and 1 switch. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdArión
Arión es un seguidor de líneas basado en la categoría Micromouse. Se caracteriza por ser tanto pequeño como liviano, y por estar siempre en búsqueda de innovaciones que le permitan tener mayor velocidad y mejor control, mediante diferentes mejoras de mecánica, electrónica y software. Nuestro objetivo es ganar las varias competencias de carreras que organiza la Liga Nacional de Robótica, mientras proporcionamos un diseño abierto y fácilmente replicable, para que cualquiera pueda hacer su propio robot y hacerle las modificaciones que potencien el estado de la robótica en nuestro país.
Estado Actual
Un primer prototipo con varias adaptaciones obtuvo el tercer lugar en la Liga Nacional de Robótica de 2015. Actualmente estamos estandarizando estas adaptaciones para tener un diseño monolítico, tanto de mecánica y electrónica como de software.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1 uF | Capacitors_SMD:C_0805 | C4, C6, C8 |
| 2 | 10 uF | SMD_Packages:SMD-1206_Pol | C5, C7 |
| 2 | 15 pF | Capacitors_SMD:C_0805 | C2, C3 |
| 1 | 10 k | LEDs:LED-0805 | R1 |
| 1 | 16 MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 330 | LEDs:LED-0805 | R2 |
| 1 | ARDUPROMINI-6 | Bibliotecas:ArduProMinicdr2 | uP1 |
| 1 | ATMEGA328-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | REG_104-5 | SOT223-5:SOT223-5 | U1 |
| 1 | SW_PUSH | Capacitors_SMD:C_0805 | SW1 |
| 1 | Verde | LEDs:LED-0805 | D1 |
Questions
How big is the Arduinopromini PCB?
It measures 21.8 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduinopromini use?
15 parts, built around the ATMEGA328-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduinopromini KiCad files?
From the cdrfiuba/arion repository on GitHub, at the commit this page was made from: the board is ArduinoCDR/arduinopromini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduinopromini design in my own project?
Its repository states no licence, so its author keeps all rights: ask cdrfiuba before reusing the design.
Similar boards
- 2 layers76.2 × 76.2 mm
PaperBack Converter
dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display
92 parts83MIT - 2 layers18 × 33.2 mm
Arduino pro mini
etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini
23 parts69 - 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 4 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers100 × 70 mm
- 2 layers52.6 × 45.6 mm
