
TP540xSAL
cdntinker/TP540xEVM
(This project started as a result of the truly awful EVM design from TI for these chips.)

(This project started as a result of the truly awful EVM design from TI for these chips.)
TP540xMCB is an open-source printed circuit board by cdntinker, from the cdntinker/TP540xEVM repository on GitHub. It is a 2-layer board of 36 × 25.7 mm with 11 parts on 3 nets, routed with 8 tracks and 0 vias.
Its parts include 2 capacitors and 2 connectors.
(This project started as a result of the truly awful EVM design from TI for these chips.)
This little circuit should work with either the TPS5403 or TPS5405 from Texas Instruments.
Both chips will accept up to 28V input.
The TPS5403 wants 4.5-28V & outputs 3v3 up to 1.7A.
The TPS5405 wants 6.5-28V & outputs 5v0 up to 2A.
Basically, a standalone voltage regulator board...
A tiny little voltage regulator module (daughterboard)...
There is also a symbol/footprint/3D model set in KiCAD Customs for this module.
Like Standalone, but using Module instead of parts on the board...
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330uF | Capacitor_SMD:CP_Elec_8x10 | C2, C3 |
| 1 | Input | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J1 |
| 1 | LOGO | Tinker:NerdMage | G*** |
| 1 | Output | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
| 1 | TPS540xMOD | Tinker:TPS540xMOD | MOD1 |
The 6 most common of 11 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 36 × 25.7 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cdntinker/TP540xEVM repository on GitHub, at the commit this page was made from: the board is Carrier Hardware/TP540xMCB.kicad_pcb and its schematic Carrier Hardware/TP540xMCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cdntinker before reusing the design.