cdennis3223/BarometerArray1Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
ExtDPS368 is an open-source printed circuit board by cdennis3223, from the cdennis3223/BarometerArray repository on GitHub. It is a 2-layer board of 18.8 × 15.2 mm with 5 parts on 6 nets, routed with 29 tracks and 3 vias.
It is built around the DPS368XTSA1 and B6B-PH-K-S-GW. Its parts include 1 capacitor, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | B6B-PH-K-S | B6B_PH_K_S:JST_B6B-PH-K-S | J1 |
| 1 | DPS368XTSA1 | DPS368XTSA1:XDCR_DPS368XTSA1 | U1 |
The 3 most common of 5 parts.
It measures 18.8 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the DPS368XTSA1 and B6B-PH-K-S-GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cdennis3223/BarometerArray repository on GitHub, at the commit this page was made from: the board is PCB/ExtDPS368.kicad_pcb and its schematic PCB/BarometricPressureSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cdennis3223 before reusing the design.
cdennis3223/BarometerArray
Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
cdennis3223/BarometerArray
Capstone Project in collaboration with Sam Bower, Utilizing ESP32 controlled devices to measure fast changing barometric pressure in an arrayed pattern with time correlated data.
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices
SG295/ece477_guitartuner
Automatic Guitar Tuner Project for ECE477 (Senior Design) @ Purdue University
UC-Aerospace/Hybrid25_ECU
The central ECU is pretty simple and carries out a couple of tasks. Firstly is comms which is easy to see with CAN on the left and RS422 on the right of the schematic.
DVA490-474-Project-Course/SSL-Hardware-Development
Contains all hardware related material. (No software).
