

Minimum viable badge
A minimum viable badge design.
- Size
- 120 × 66.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 64
- Pads
- 310
- Tracks, vias
- 1,057, 152
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Jun 2017
- Updated
- 25 Sep 2017
Overview
Minimum viable badge is an open-source printed circuit board by CCHS-Melbourne, from the CCHS-Melbourne/Minimum-viable-badge repository on GitHub. It is a 2-layer board of 120 × 66.5 mm with 76 parts on 64 nets, routed with 1,057 tracks and 152 vias.
It is built around the CP2102, ESP32-WROOM-32 and MCP73831, with the WS2812B, SD103AWS and SS14 among its other parts. Its parts include 24 capacitors, 15 resistors, 11 diodes, 11 connectors and 5 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
9CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion ModulesESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMCP73831
UncategorisedMicrochip TechnologyWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedSD103AWS
SOD-3231 Independent 2A 350mA 40V 5uA@30V 600mV@200mA SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)FDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETsIRLML0030TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.3V 1.3W 2.6nC@10V 27mΩ 30V 382pF 39pF 5.3A SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdMinimum Viable Badge - Just the facts.
This project is designed to be the absolute minimum number of components to do a badge.
FEATURES
- ESP32 based.
- CP2102 USB to serial.
- eInk Display.
CREDITS
Made at hackmelbourne.org!
This project was designed by the 2018 linux.conf.au Open Hardware Team!
SPECIAL THANKS
To the HackMelbourne (CCHS, http://hackmelbourne.org) community of Melbourne, Australia.
To all other open-source developers whose countless hours supported every other aspect of this design.
DISTRIBUTION
The specific terms of distribution of this project are governed by the license referenced below. Please contact the copyright owner if you wish to modify the board for distribution. Please utilize this design for personal or research projects. Please acknowledge all contributors.
LICENSE
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" sub-folder also contains a copy of this license in plain text format.
Copyright John Spencer, Bob Powers, Angus Gratton, Andy Gelme, Jon Oxer, Mark Wolfe 2017
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1uF 25V | Capacitors_SMD:C_0603_HandSoldering | C302, C303, C304, C305, C306, C307, C308, C309, C310, C311, C312 |
| 5 | 470R | Resistors_SMD:R_0603_HandSoldering | R101, R102, R105, R203, R401 |
| 4 | WS2812B | libs:WS2812B | LED401, LED402, LED403, LED404 |
| 3 | 12K | Resistors_SMD:R_0603_HandSoldering | R106, R201, R402 |
| 3 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C103, C203, C301 |
| 3 | 4.7uF | Capacitors_SMD:C_0805_HandSoldering | C201, C202, C401 |
| 3 | MECH | Mounting_Holes:MountingHole_3.2mm_M3_Pad | P107, P108, P109 |
| 3 | SD103AWS | Diodes_SMD:D_SOD-323 | D301, D302, D303 |
| 3 | SS14 | Diodes_SMD:D_SMA | D101, D201, D202 |
| 2 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C105, C107 |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C104, C106 |
| 2 | 12K(1%) | Resistors_SMD:R_0603_HandSoldering | R107, R108 |
| 2 | 1uF 6.3V | Capacitors_SMD:C_0603_HandSoldering | C101, C102 |
| 2 | S8050 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q101, Q102 |
| 1 | 0R | Resistors_SMD:R_0603_HandSoldering | R301 |
| 1 | 100K 1% | Resistors_SMD:R_0603_HandSoldering | R104 |
| 1 | 100uF 10V X5R | Capacitors_SMD:C_1210_HandSoldering | C204 |
| 1 | 1A PTC | Diodes_SMD:D_1206 | F101 |
| 1 | 1M 1% | Resistors_SMD:R_0603_HandSoldering | R103 |
| 1 | 2K 5% | Resistors_SMD:R_0603_HandSoldering | R202 |
| 1 | 2R7, 1% | Resistors_SMD:R_0603_HandSoldering | R302 |
| 1 | 47uH 410MA | Capacitors_SMD:C_1210_HandSoldering | L301 |
| 1 | BATTERY | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | P102 |
| 1 | BUTTON_A | libs:buttons | P104 |
| 1 | BUTTON_B | libs:buttons | P105 |
| 1 | CHRG | LEDs:LED_0603 | D203 |
| 1 | CP2102 | Housings_DFN_QFN:QFN-28-1EP_5x5mm_Pitch0.5mm | U102 |
| 1 | EDGE_CONNECTOR | libs:Edge_Connector_S20-2.54-5_bottomsideonly | J101 |
| 1 | ESP32-WROOM | ESP32-footprints-Lib:ESP32-WROOM | U101 |
| 1 | FDN340P | libs:SOT23_FET | Q201 |
| 1 | IRLML0030TRPBF | TO_SOT_Packages_SMD:SOT-23 | Q301 |
| 1 | LOGO | libs:LCA2018_LOGO | G*** |
| 1 | MCP73831 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U201 |
| 1 | ON|OFF | libs:SK12D07VG3 | SW201 |
| 1 | POT_LONG | libs:sense_long | P103 |
| 1 | POT_SHORT | libs:sense_short | P106 |
| 1 | PRGM | libs:K2-1107st | SW101 |
| 1 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q401 |
| 1 | RESET | libs:K2-1107st | SW102 |
| 1 | USB | libs:USB-MICRO-5pin_PTHMOUNT-Amphenol.10118194-0001LF | P101 |
| 1 | XC6210A33MR-G | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U202 |
| 1 | eInk | libs:FPC_0.5mm_Pitch_24_Pin | P301 |
Similar boards
- 2 layers100 × 100 mm

- 4 layers38.5 × 47 mm

- 2 layers100.1 × 100.1 mm

- 2 layers49.4 × 95.7 mm

- 2 layers50.8 × 49.5 mm

- 2 layers77 × 77 mm

- 4 layers90 × 90 mm

- 2 layers80 × 54 mm

Lux et pcb V2
machadoleonardo94/lux-et-tenebris
Devkit for LED strips, with wide range of voltage inputs, and options for current limited outputs
87 parts10BSD
Questions
How big is the Minimum viable badge PCB?
It measures 120 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Minimum viable badge use?
76 parts, built around the CP2102, ESP32-WROOM-32, MCP73831 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Minimum viable badge KiCad files?
From the CCHS-Melbourne/Minimum-viable-badge repository on GitHub, at the commit this page was made from: the board is minimum-viable-badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Minimum viable badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask CCHS-Melbourne before reusing the design.