2 layers40 × 20 mm
2 layers113 × 81.3 mm
NesEMU
ccadic/NES_ESP329Nintendo Emulator PCB for ESP32 TTGO
- Size
- 113 × 81.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 20
- Pads
- 92
- Tracks, vias
- 298, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 May 2019
- Updated
- 6 May 2019
Overview
NesEMU is an open-source printed circuit board by ccadic, from the ccadic/NES_ESP32 repository on GitHub. It is a 2-layer board of 113 × 81.3 mm with 13 parts on 20 nets, routed with 298 tracks and 7 vias.
Its parts include 10 switches, 2 ICs and 1 connector. It belongs with the ESP32 boards of this library.
README
README.mdNES_ESP32
Nintendo Emulator PCB for ESP32 TTGO
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | A | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW9 |
| 1 | B | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW4 |
| 1 | DOWN | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW2 |
| 1 | LEFT | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW3 |
| 1 | MENU | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW7 |
| 1 | ON-OFF | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW6 |
| 1 | RIGHT | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW5 |
| 1 | SELECT | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW8 |
| 1 | SPK1 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | J1 |
| 1 | START | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW10 |
| 1 | TJCTM24028-SPI | TTGO-LoraCom:TJCTM24028-SPI | U2 |
| 1 | TTGO-ESP32 | TTGO-LoraCom:TTGO-ESP32 | U1 |
| 1 | UP | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW1 |
Questions
How big is the NesEMU PCB?
It measures 113 × 81.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NesEMU use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NesEMU KiCad files?
From the ccadic/NES_ESP32 repository on GitHub, at the commit this page was made from: the board is NesEMU.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NesEMU design in my own project?
Its repository states no licence, so its author keeps all rights: ask ccadic before reusing the design.
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0