2 layers57 × 75 mm
2 layers127 × 63.5 mm
Feather valve driver
cbs-ntcore/feather_valve_driver16 Channel Valve driver (designed for 12 volt Lee valves) using a Feather microcontroller
- Size
- 127 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 61
- Pads
- 225
- Tracks, vias
- 436, 36
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Aug 2022
- Updated
- 2 Aug 2022
Overview
Feather valve driver is an open-source printed circuit board by cbs-ntcore, from the cbs-ntcore/feather_valve_driver repository on GitHub. It is a 2-layer board of 127 × 63.5 mm with 78 parts on 61 nets, routed with 436 tracks and 36 vias.
Its parts include 32 resistors, 16 diodes, 16 transistors, 7 connectors and 2 capacitors. It belongs with the audio and music and microcontroller boards boards of this library.
README
README.mdFeather compatible 16 channel valve driver.
This was designed for 12 volt Lee valves.
See errata for current minor electronic issues.
A simple 3d printed baseplate is included that supports the Lee valves:
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15, R17, R19, R21, R23, R25, R27, R29, R31 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R16, R18, R20, R22, R24, R26, R28, R30, R32 |
| 16 | D | Diode_SMD:D_SMA_Handsoldering | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | Conn_01x16 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-16-5.08_1x16_P5.08mm_Horizontal | J1, J2 |
| 1 | Conn_01x02 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J17 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J19 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J18 |
| 1 | EXTRA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J21 |
| 1 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1 |
| 1 | QWIIC | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J20 |
Similar boards
- 2 layers68.5 × 34.5 mm
TERES PCB5-KEYBOARD Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
78 parts578Apache-2.0 - 2 layers66.4 × 48.1 mm
- 2 layers38.1 × 19 mm
- 2 layers100 × 50 mm
- 2 layers110.5 × 111.1 mm
Teensy eurorack breakout
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
78 parts259MIT - 2 layers65 × 56 mm
Keyboard whiz
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
78 parts253GPL-3.0 - 2 layers43.2 × 128.3 mm
Questions
How big is the Feather valve driver PCB?
It measures 127 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Feather valve driver use?
78 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Feather valve driver KiCad files?
From the cbs-ntcore/feather_valve_driver repository on GitHub, at the commit this page was made from: the board is electronics/feather_valve_driver/feather_valve_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Feather valve driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask cbs-ntcore before reusing the design.