

NRF5340 aQFN
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 72
- Pads
- 149
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Dec 2025
- Updated
- 9 Jun 2026
Overview
NRF5340 aQFN is an open-source printed circuit board by cbraissant, from the cbraissant/KiCad_Library repository on GitHub. It is a 2-layer board with 23 parts on 72 nets.
Its parts include 17 capacitors, 3 inductors, 2 crystals and 1 IC. It belongs with the nRF52 and nRF5x boards of this library.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | EPFL_Passive:C_0201_0603Metric | C6, C8, C9, C10, C11, C12, C13, C14, C15 |
| 5 | 1.0uF | EPFL_Passive:C_0402_1005Metric | C2, C3, C5, C7, C16 |
| 2 | 10uH | EPFL_Passive:L_0603_1608Metric | L2, L3 |
| 1 | 0.7pF | EPFL_Passive:C_0201_0603Metric | C1 |
| 1 | 10uH | EPFL_Passive:L_0201_0603Metric | L1 |
| 1 | 2.2nF | EPFL_Passive:C_0201_0603Metric | C4 |
| 1 | 32.768kHz | EPFL_Crystals:Crystal_SMD_1610-2Pin_1.6x1.0mm | X2 |
| 1 | 32MHz | EPFL_Crystals:Crystal_SMD_1612-4Pin_1.6x1.2mm | X1 |
| 1 | Nordic nRF5340 | EPFL_IC:Nordic_AQFN-94-1EP_7x7mm_P0.4mm | U1 |
| 1 | ~ | EPFL_Passive:C_0201_0603Metric | C21 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
What parts does the NRF5340 aQFN use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NRF5340 aQFN KiCad files?
From the cbraissant/KiCad_Library repository on GitHub, at the commit this page was made from: the board is blocks/nrf52840_aqfn.kicad_blocks/nRF5340_aQFN.kicad_block/nRF5340_aQFN.kicad_pcb and its schematic blocks/kicad_blocks/kicad_blocks.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NRF5340 aQFN design in my own project?
Its repository states no licence, so its author keeps all rights: ask cbraissant before reusing the design.