
Ram card-256k
cazacov/PocketComputers
My experiments with programmable calculators and pocket computers

My experiments with programmable calculators and pocket computers
Sharp serial-6pin is an open-source printed circuit board by cazacov, from the cazacov/PocketComputers repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.8 × 30.5 mm with 7 parts on 17 nets, routed with 32 tracks and 0 vias.
Its parts include 2 resistors, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
My experiments with programmable calculators and pocket computers.

PC-E500/E500s RAM upgrade project
All trademarks, logos and brand names are the property of their respective owners. All company, product and service names are for identification purposes only.
I am not an electronics engineer. It's a hobby project. Use it at your own risk.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 0R | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 330R | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | FT232RL_6pin | custom:FT232RL_6pins | J2 |
| 1 | LED_Small | LED_THT:LED_D3.0mm | D1 |
| 1 | sharp_connector_15pin | custom:sharp_connector_15pin | J1 |

cazacov/PocketComputers
My experiments with programmable calculators and pocket computers

cazacov/PocketComputers
My experiments with programmable calculators and pocket computers

cazacov/PocketComputers
My experiments with programmable calculators and pocket computers

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 53.8 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cazacov/PocketComputers repository on GitHub, at the commit this page was made from: the board is sharp-serial/sharp-serial-6pin/sharp-serial-6pin.kicad_pcb and its schematic casio-pb-1000/RAM-card-RP-32/RP-32/RP-32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).