2 layers290.1 × 130 mm
4 layers49.7 × 47.4 mm
HW Tester
CasualCodersProjects/DS4-C-HWTestingHardware testing our DS4 C Boards automatically!
- Size
- 49.7 × 47.4 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 58
- Nets
- 50
- Pads
- 199
- Tracks, vias
- 520, 72
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Apr 2022
- Updated
- 30 Apr 2022
Overview
HW Tester is an open-source printed circuit board by CasualCodersProjects, from the CasualCodersProjects/DS4-C-HWTesting repository on GitHub. It is a 4-layer board of 49.7 × 47.4 mm with 58 parts on 50 nets, routed with 520 tracks and 72 vias.
It is built around the AMS1117-3.3. Its parts include 9 capacitors, 4 resistors, 2 connectors, 1 IC and 1 crystal. It belongs with the STM32 boards of this library.
Main components
1Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, CC1, CC2 +18 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 1 | 001 | Molex 503480-1400:503480-1400 | J4 |
| 1 | 011/030/040/05x | Molex 503480-1200:503480-1200 | J3 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10nf | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | 3v3 |
| 1 | Boot Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BOOT |
| 1 | JDS USB | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | JDS USB |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | JTAG |
| 1 | LOGO | CC_Logos:CC Logo 10mm 6.0 | Ge |
| 1 | Resonator | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | SSD1306 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SSD1306 |
| 1 | STM32F303CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB C Power | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | USB |
Questions
How big is the HW Tester PCB?
It measures 49.7 × 47.4 mm and has 4 copper layers, 4.69 mm thick.
What parts does the HW Tester use?
58 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HW Tester KiCad files?
From the CasualCodersProjects/DS4-C-HWTesting repository on GitHub, at the commit this page was made from: the board is HW_Tester/HW_Tester.kicad_pcb and its schematic HW_Tester/HW_Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HW Tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask CasualCodersProjects before reusing the design.
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407