
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

This is repository for all iterations of version 2 for the Ready To Drive Light for BYU's Formula SAE Electric Car
Ready To Drive Light is an open-source printed circuit board by carsoncoleman51, from the carsoncoleman51/ReadyToMoveLight repository on GitHub. It is a 2-layer board of 118.6 × 23.4 mm with 29 parts on 24 nets, routed with 71 tracks and 0 vias.
Its parts include 8 resistors, 4 ICs, 2 capacitors, 2 connectors and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 270kohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8 |
| 2 | 1kohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 4pin header connector | 4pin header connector:CONN_SD-172648-0000_04_MOL | J1, J2 |
| 1 | 10k Potentiometer | pot 10k:3296W-1-103_BRN | U5 |
| 1 | 10kohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 10nf | 10nf capacitor:CAP_B32021_TDK | C3 |
| 1 | 22uf | 22uf capacitor:PCAP_16x20-THRU-ELECT_NCA | C2 |
| 1 | 4N35 optocoupler | Package_DIP:DIP-6_W7.62mm | U1 |
| 1 | LED | LED_THT:LED_D5.0mm_FlatTop | D1 |
| 1 | LM311N/NOPB comparator | LM311N_NOPB:N08E | U6 |
| 1 | NE555P timer | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | NMOS | MOSFET_N_TO220:TO220AB_VIS | Q1 |
| 1 | TestPoint HV- | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP3 |
| 1 | TestPoint HV12+ | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP4 |
| 1 | TestPoint HV390+ | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP2 |
| 1 | TestPoint LV+ | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP10 |
| 1 | TestPoint LV- | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP9 |
| 1 | TestPoint VolDiv | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP1 |
| 1 | TestPoint comp out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP5 |
| 1 | TestPoint hooplight | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP8 |
| 1 | TestPoint opto in | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP6 |
| 1 | TestPoint opto out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP7 |
| 1 | TestPoint timer out | TestPoint:TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded | TP11 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 118.6 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the carsoncoleman51/ReadyToMoveLight repository on GitHub, at the commit this page was made from: the board is Ready To Drive Light.kicad_pcb and its schematic Ready To Drive Light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask carsoncoleman51 before reusing the design.