2 layers30 × 61.3 mm
2 layers85 × 32.5 mm
HatchBot
carlyjb/SumoPcbInitial board design. Spaghetti traces, no extra breakouts.
- Size
- 85 × 32.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 34
- Pads
- 139
- Tracks, vias
- 297, 9
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Jul 2016
- Updated
- 3 Mar 2017
Overview
HatchBot is an open-source printed circuit board by carlyjb, from the carlyjb/SumoPcb repository on GitHub. It is a 2-layer board of 85 × 32.5 mm with 45 parts on 34 nets, routed with 297 tracks and 9 vias.
Its parts include 12 diodes, 4 capacitors, 4 resistors, 4 connectors and 1 IC.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1N4001 | Diodes_THT:Diode_DO-35_SOD27_Horizontal_RM10 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | LED | LEDs:LED-3MM | LED1, LED2, LED3, LED4 |
| 4 | MountingHole_3.2mm_M3_Pad | Mounting_Holes:MountingHole_3.2mm_M3_Pad | , , , |
| 3 | 1.2KΩ | Resistors_THT:Resistor_Horizontal_RM7mm | R1, R2, R3 |
| 2 | 0.1µF | Capacitors_THT:C_Disc_D7.5_P5 | C1, C3 |
| 2 | 10µF | Capacitors_THT:C_Radial_D5_L6_P2.5 | C2, C4 |
| 2 | LOGO | HatchLib:HatchLogo | G***, G*** |
| 1 | 270Ω | Resistors_THT:Resistor_Horizontal_RM7mm | R4 |
| 1 | DIST | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | EXP | Pin_Headers:Pin_Header_Straight_2x04 | XP1 |
| 1 | GND TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP1 |
| 1 | JP1 | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | JP2 | Pin_Headers:Pin_Header_Straight_1x02 | JP2 |
| 1 | LEFT | Pin_Headers:Pin_Header_Straight_1x03 | P2 |
| 1 | Logic Power | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | LPWR1 |
| 1 | Motor Power | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | Motor Power |
| 1 | Motor1 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | M1 |
| 1 | Motor2 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | M2 |
| 1 | PWMA TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP5 |
| 1 | PWMB TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP4 |
| 1 | RIGHT | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | TB6612FNG | Housings_SSOP:SSOP-24_5.3x8.2mm_Pitch0.65mm | U1 |
| 1 | Trinket Pro 5V | HatchFootprints:Trinket_Pro_5V | J1 |
| 1 | V_LOGIC TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP3 |
| 1 | V_MOTOR TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP2 |
The 43 most common of 45 parts.
Questions
How big is the HatchBot PCB?
It measures 85 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HatchBot use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HatchBot KiCad files?
From the carlyjb/SumoPcb repository on GitHub, at the commit this page was made from: the board is HatchBot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HatchBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask carlyjb before reusing the design.
Similar boards
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm
- 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm
RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm
