Microbit eink feather adaptor

micro:bit eInk Feather Adaptor

This is a simple FeatherWing to micro:bit adaptor board designed specifically for the Adafruit 2.9" Grayscale eInk / ePaper Display FeatherWing: https://www.adafruit.com/product/4777

Repository Contents

• datasheets: Datasheets for the components used in this adaptor board
• docs: Documentation related to this adaptor board
• firmware: Arduino Skectch to test the eInk FeatherWing with a micro:bit
• hardware: The KiCad project files
• output: Project output files, like the BOM, schematic PDFs, etc.
  • interactive_bom: BOM output from the Interactive HTML BOM KiCad plugin.
  • pdf: Schematic PDFs.
  • production: Gerber and drill files.

Documentation

• Pinout connections for the adaptor board: docs/pins.md
• eInk FeatherWing product page
• Adafruit documentation for the eInk FeatherWing
• Documentation for the family of Adafruit 2.9" eInk Display Breakouts and FeatherWings
• Project Changelog: CHANGELOG.md

License & Attributions

The Arduino test sketch is based on the Adafruit EDP ThinkInk_gray4 example, with MIT License.

The micro:bit edge connector is MIT Licensed and comes from: https://github.com/anthonykirby/kicad_microbit_connector

This project has been based on this FeatherWing template: https://github.com/ppelleti/FeatherWing-template-KiCad

The FeatherWing template and the rest of the repository (except where stated otherwise) is licensed under the same terms as the KiCad libraries, which is the CC-BY-SA 4.0 license, with an exception that says that electronic designs based on this repository are not bound by the attribution and share-alike conditions.